John Deere Worksite Pro Heavy Duty Rail-Style Pallet Forks🔵 Mid
✓ No hydraulics required
View on brandt.ca →
Overview
The heavy-duty rail-style forks are the commercial workhorse in the Worksite Pro pallet fork range. Heavier frame construction handles lumber yards, building supply, and dense material loads that would flex a standard-duty unit. The sliding rail gives you adjustable tine spacing for different load widths — useful on any site where pallets aren't all the same size. At 602 lb it's substantially heavier and wider than the standard-duty models, purpose-built for regular commercial and construction use. No hydraulics required.
Canada Availability
Available in Canada through Brandt / John Deere Worksite Pro — dealer locations in BC, AB, SK, MB, and ON.
Key Facts
- Weight: 602 lb
- Application: heavy pallets, construction materials, high-cycle commercial loading
- Frame dimensions: 57.5 in L x 40.7 in W x 38.5 in H
- Tine style: rail-mount, tines slide along full-width rail, adjustable spacing
- Duty rating: heavy duty — commercial construction, lumber yards, dense material handling
- Heavier frame construction vs. standard-duty models
- No hydraulics required
- SSQA (universal skid steer quick attach) mount
- Compatible with John Deere skid steers, compact track loaders, and compact wheel loaders; compatible with most competitive models
- Hydraulic flow: none required — passive attachment, no auxiliary hydraulics
✅ Specs sourced from brandt.ca · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- You lift pallets, bags, small bundles, or materials up to 4,000 lbs regularly
- Your machine is mid-frame (S450–S570 class) and typical loads are within standard-duty capacity
⛔ Skip if…
- You regularly lift heavy or awkward loads over 5,000 lbs — standard-duty tines can bend under shock loads
- Bin moves, heavy concrete, or steel pipe are common — heavy-duty tines are worth the cost
🔍 Also consider…
- Heavy-duty pallet forks if your load weights push the limit of the frame rating
- Fork frame carriage upgrade if you want a higher ITA carriage class for more lift capacity
🔧 Machine Compatibility
Designed for John Deere machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.
About John Deere in Canada
John Deere attachments are available through an extensive Canadian dealer network, ensuring local service, parts availability, and warranty support coast to coast. Designed to pair with JD machines but compatible with any skid steer via universal quick attach.
Care & Maintenance
- Inspect tines weekly for bending, spreading, or cracking — a deformed tine is a structural failure, not cosmetic; take it out of service immediately
- Check tine adjustment pins and stops before every heavy lift — loose pins allow tines to shift under load
- Grease carriage slide bearings and tine clamp mechanisms monthly
- Inspect frame welds for cracking, especially around the top hook and lower receiver bar — these are the highest-stress points on the frame
- Verify load rating labels are legible on the frame; worn or missing labels are a safety compliance issue in commercial and regulated jobsite use
How to Connect
- Slide fork frame onto Bob-Tach receiver arms
- Pull lock levers to engage
- Verify orange indicators locked
- Adjust fork width to load before lifting — most frames allow no-tool width adjustment
⚠ Safety NoteNever exceed the rated capacity of the fork frame — check the frame decal
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/pallet-forks/john-deere-worksite-pro-heavy-duty-rail-forks/
