TMG-SPG48 48-Inch Pallet Forks for Skid Steers💚 Budget
✓ No hydraulics required
✓ Fits most skid steers, including small-frame
View on tmgindustrial.ca →
Overview
The TMG-SPG48 is a 48-inch pallet fork set for full-size skid steers moving pallets, pipe bundles, lumber, and bagged goods on farms, construction yards, and industrial sites. The 48-inch tine length is the most common fork size — it covers standard pallets and gives enough reach for oversized loads without being unwieldy. Universal SSQA mount. TMG Industrial is a direct-to-customer Canadian brand, so availability is nationwide without needing a dealer. A solid mid-range fork set for operators doing general material handling. Sold direct from TMG Industrial Canada.
Canada Availability
Available direct from TMG Industrial Canada (tmgindustrial.ca).
Key Facts
- Model: TMG-SPG48
- Tine length: 48 inches
- Application: general material handling
- Mount: universal SSQA
- Typical frame weight: 400–550 lbs
- Hydraulic flow: none required — passive attachment, no auxiliary hydraulics
Is This Right For You?
✅ Buy if…
- You lift pallets, bundles, or stacked material regularly and want the machine you already own to do it
- Quick-attach compatibility means you can swap in forks without a second machine
⛔ Skip if…
- Your loads are heavy round stock or poles — pipe grapple tines handle those better
- The fork weight would push your machine near its ROC limit for the loads you're lifting
🔍 Also consider…
- Bale spear for farming operations with round or square bales
- Pipe grapple forks for cylindrical or irregular stock
🔧 Machine Compatibility
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About TMG Industrial in Canada
TMG Industrial imports and distributes a broad range of construction attachments from its Canadian warehouses, offering competitive pricing with delivery across Canada. A popular choice for contractors who want solid value without long lead times.
Care & Maintenance
- Inspect tines weekly for bending, spreading, or cracking — a deformed tine is a structural failure, not cosmetic; take it out of service immediately
- Check tine adjustment pins and stops before every heavy lift — loose pins allow tines to shift under load
- Grease carriage slide bearings and tine clamp mechanisms monthly
- Inspect frame welds for cracking, especially around the top hook and lower receiver bar — these are the highest-stress points on the frame
- Verify load rating labels are legible on the frame; worn or missing labels are a safety compliance issue in commercial and regulated jobsite use
How to Connect
- Slide fork frame onto Bob-Tach receiver arms
- Pull lock levers to engage
- Verify orange indicators locked
- Adjust fork width to load before lifting — most frames allow no-tool width adjustment
⚠ Safety NoteNever exceed the rated capacity of the fork frame — check the frame decal
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/pallet-forks/tmg-spg48-tmg-pallet-forks/
