IronBull 60-Inch Power Rake for Skid Steers💚 Budget
🟢 Standard Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
⚠ Borderline for small-frame machines — verify ROC
✓ Fits most mid-frame skid steers & CTLs
View on ironbull.ca →
Overview
The IronBull 60-inch power rake is a hydraulic attachment for seedbed preparation, soil breaking, and landscape grading on smaller skid steers and compact track loaders. Carbide-tipped or hardened steel teeth scarify and break up soil while the basket or side discharge separates debris from finished grade. Compact enough for tight residential lots. Available direct from IronBull Canada with free shipping.
Canada Availability
Available direct from IronBull Canada (ironbull.ca) with Canadian shipping included.
Key Facts
- Working width: 60 inches
- Type: power rake with hydraulic rotor
- Application: seedbed prep, soil scarifying, landscape grading
- Drive: hydraulic
- Mount: universal skid steer quick attach (SSQA)
- Weight: 500–1500 lbs
- Hydraulic flow: 15–30 GPM
✅ Specs sourced from ironbull.ca · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- You're breaking up compacted gravel roads, hardpan, or packed aggregate before regrading
- Your site has frost-heaved or rutted surfaces that need aggressive tine action before re-spreading
- You need to loosen material before a final grading pass — scarifiers prep the surface efficiently
⛔ Skip if…
- You're finishing a prepared seedbed — a standard power rake with finer tines does that job better
- Your soil is already loose — scarifier tines dig too aggressively and will over-till
🔍 Also consider…
- Standard power rake for final seedbed prep and debris removal
- Landplane for final levelling after scarifying
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid to large-frame machines (S450–S750 class) are the best fit for this width.
About IronBull in Canada
IronBull attachments are distributed across Canada through online and dealer channels, offering competitive pricing on workhorse models suited to farm, construction, and municipal use.
Care & Maintenance
- Inspect rotor teeth after each use — chipped or missing carbide dramatically reduces grading quality and throws the rotor off balance
- Grease rotor shaft bearing housings at each end after every 8 hours of use — most premature bearing failures trace back to insufficient lubrication intervals
- Clean packed soil from rotor teeth and the housing after every job — built-up soil throws the rotor out of balance and restricts rotation
- Replace worn teeth in matched sets — mixing old and new teeth across the rotor causes uneven cutting and vibration that stresses the drive
- Inspect hydraulic motor drive connections and belt tension (if belt-driven) weekly during active season
How to Connect
- Attach frame using Bob-Tach
- Connect hydraulic rotor circuit
- Adjust rotor depth by lowering carefully — engage at surface before penetrating soil
- Set material deflector angle if applicable
⚠ Safety NotePower rakes are standard-flow on most models. Excellent for seedbed prep and spring field work.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/power-rakes/ironbull-power-rake-60/
