TMG-SPR108 108-Inch Power Rake for Skid SteersBudget
🟢 Standard Flow
View on tmgindustrial.ca →
Overview
The TMG-SPR108 is TMG Industrial's 108-inch (9-foot) power rake — their widest hydraulic power rake for large-frame skid steers on major commercial seedbed preparation and large-scale turf renovation projects. At 9 feet, it's the right tool for contractors tackling large residential developments, golf courses, and municipal greenspace restoration across Canada. Sold direct from TMG Industrial Canada with Canadian shipping.
Canada Availability
Available direct from TMG Industrial Canada (tmgindustrial.ca) with Canadian shipping.
Key Facts
- Working width: 108 inches (9 feet)
- Model: TMG-SPR108
- Type: hydraulic power rake
- Application: major commercial seedbed prep, golf courses, large turf renovation
- Drive: hydraulic motor
- Weight: 875–2600 lbs
- Hydraulic flow: 15–30 GPM
Is This Right For You?
✅ Buy if…
- You prep lawns, subdivision lots, or acreage for seeding — power rakes clear debris and till in one pass
- Spring cleanup or post-construction site restoration is a regular part of your work
- You need to remove rocks, sticks, and surface debris while grading to a final seed-ready surface
⛔ Skip if…
- Heavy clay, packed gravel, or compacted subsoil is your main challenge — a soil conditioner tills deeper
- You're doing large-scale tillage — a rototiller covers more depth per pass on agricultural ground
🔍 Also consider…
- Soil conditioner for deeper tilling on compacted or clay-heavy ground
- Landscape rake for light debris cleanup without tine-tilling
🔧 Machine Compatibility
Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Best suited to large-frame machines (S750+ class or equivalent CTL).
About TMG Industrial in Canada
TMG Industrial imports and distributes a broad range of construction attachments from its Canadian warehouses, offering competitive pricing with delivery across Canada. A popular choice for contractors who want solid value without long lead times.
Care & Maintenance
- Inspect rotor teeth after each use — chipped or missing carbide dramatically reduces grading quality and throws the rotor off balance
- Grease rotor shaft bearing housings at each end after every 8 hours of use — most premature bearing failures trace back to insufficient lubrication intervals
- Clean packed soil from rotor teeth and the housing after every job — built-up soil throws the rotor out of balance and restricts rotation
- Replace worn teeth in matched sets — mixing old and new teeth across the rotor causes uneven cutting and vibration that stresses the drive
- Inspect hydraulic motor drive connections and belt tension (if belt-driven) weekly during active season
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/power-rakes/tmg-spr108-power-rake/
