Virnig PRK90 90-Inch Skid Steer Power Rake🔵 Mid
🟢 Standard Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
✓ Fits most skid steers, including small-frame
View on virnigmfg.com →
Overview
Virnig's PRK90 is the widest power rake in their lineup at 90 inches straight working width, suited for large skid steers on large-scale seedbed, lawn renovation, and site finishing work. With 127 teeth on the 7.5-inch drum and an 83.4-inch working width at full angle, it handles wide open areas efficiently with fewer passes. Bi-directional, standard flow 15-25 GPM. Ships to Canada through authorized Virnig dealers.
Canada Availability
Virnig attachments available through authorized North American dealers shipping to Canada.
Key Facts
- Model: PRK90
- Working width straight: 90 inches
- Working width at full angle: 83.4 inches
- Overall width: 99 inches
- Drum diameter: 7.5 inches
- Number of teeth: 127
- Recommended flow: 15-25 GPM
- Weight: 985 lbs
- Recommended loader capacity: greater than 1,500 lbs
Is This Right For You?
✅ Buy if…
- You prep lawns, subdivision lots, or acreage for seeding — power rakes clear debris and till in one pass
- Spring cleanup or post-construction site restoration is a regular part of your work
- You need to remove rocks, sticks, and surface debris while grading to a final seed-ready surface
⛔ Skip if…
- Heavy clay, packed gravel, or compacted subsoil is your main challenge — a soil conditioner tills deeper
- You're doing large-scale tillage — a rototiller covers more depth per pass on agricultural ground
🔍 Also consider…
- Soil conditioner for deeper tilling on compacted or clay-heavy ground
- Landscape rake for light debris cleanup without tine-tilling
🔧 Machine Compatibility
Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Best suited to large-frame machines (S750+ class or equivalent CTL).
About Virnig in Canada
Virnig Manufacturing is a Minnesota-based producer known for consistent build quality and a wide model range. Their attachments ship to Canadian dealers regularly and are a common sight on Western and Prairie job sites.
Care & Maintenance
- Inspect rotor teeth after each use — chipped or missing carbide dramatically reduces grading quality and throws the rotor off balance
- Grease rotor shaft bearing housings at each end after every 8 hours of use — most premature bearing failures trace back to insufficient lubrication intervals
- Clean packed soil from rotor teeth and the housing after every job — built-up soil throws the rotor out of balance and restricts rotation
- Replace worn teeth in matched sets — mixing old and new teeth across the rotor causes uneven cutting and vibration that stresses the drive
- Inspect hydraulic motor drive connections and belt tension (if belt-driven) weekly during active season
How to Connect
- Attach frame using Bob-Tach
- Connect hydraulic rotor circuit
- Adjust rotor depth by lowering carefully — engage at surface before penetrating soil
- Set material deflector angle if applicable
⚠ Safety NotePower rakes are standard-flow on most models. Excellent for seedbed prep and spring field work.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/power-rakes/virnig-prk90-power-rake/
