Virnig V60 84-Inch Power Rake for Skid Steers🔵 Mid
🟡 High Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
⚠ Too heavy for most small-frame machines
✓ Best on mid-frame or large-frame machines
View on virnig.com →
Overview
Virnig Manufacturing's V60 84-inch power rake is a hydraulic rotary attachment for large-scale seedbed preparation and commercial lawn renovation on full-size skid steers. Part of Virnig's V60 high-flow series, it delivers more rotor torque for breaking up harder soils and more demanding ground conditions. The 84-inch working width reduces pass count on large sites. Available through authorized Canadian Virnig dealers.
Canada Availability
Available in Canada through authorized Virnig Manufacturing dealers.
Key Facts
- Working width: 84 inches
- Model series: V60
- Type: hydraulic power rake
- Application: commercial seedbed prep, large-scale lawn renovation
- Drive: hydraulic motor
- Weight: 700–2100 lbs
- Hydraulic flow: 15–30 GPM
✅ Specs sourced from virnig.com · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- Your machine runs high-flow hydraulics and you're doing large-scale site prep or commercial landscaping
- You need maximum tine speed and ground penetration for heavily compacted or rocky soil
- Production rate matters — high-flow power rakes process more square footage per hour on the right machine
⛔ Skip if…
- Your skid steer doesn't have high-flow — you won't get performance gains and may stress the hydraulics
- Residential or small-lot work — standard flow handles those sites fine at lower cost
🔍 Also consider…
- Standard power rake for machines without high-flow auxiliary
- Soil conditioner if you also need deep tilling and full seedbed integration
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid to large-frame machines (S450–S750 class) are the best fit for this width.
About Virnig in Canada
Virnig Manufacturing is a Minnesota-based producer known for consistent build quality and a wide model range. Their attachments ship to Canadian dealers regularly and are a common sight on Western and Prairie job sites.
Care & Maintenance
- Inspect rotor teeth after each use — chipped or missing carbide dramatically reduces grading quality and throws the rotor off balance
- Grease rotor shaft bearing housings at each end after every 8 hours of use — most premature bearing failures trace back to insufficient lubrication intervals
- Clean packed soil from rotor teeth and the housing after every job — built-up soil throws the rotor out of balance and restricts rotation
- Replace worn teeth in matched sets — mixing old and new teeth across the rotor causes uneven cutting and vibration that stresses the drive
- Inspect hydraulic motor drive connections and belt tension (if belt-driven) weekly during active season
How to Connect
- Attach frame using Bob-Tach
- Connect hydraulic rotor circuit
- Adjust rotor depth by lowering carefully — engage at surface before penetrating soil
- Set material deflector angle if applicable
⚠ Safety NotePower rakes are standard-flow on most models. Excellent for seedbed prep and spring field work.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/power-rakes/virnig-v60-power-rake-84/
