HLA 60-Inch Brush Cutter for Skid Steers🔵 Mid
🟡 High Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
⚠ Borderline for small-frame machines — verify ROC
✓ Fits most mid-frame skid steers & CTLs
View on hlaattachments.com →
Overview
HLA Attachments' 60-inch brush cutter is a hydraulic rotary brush mower for compact skid steers handling overgrown grass, light brush, and acreage vegetation management. The fixed-knife cutting deck is Ontario-manufactured. Requires high-flow hydraulics on most models. Available through HLA's Canadian dealer network.
Canada Availability
Available in Canada through HLA Attachments dealers. Ontario-manufactured by Horst Welding.
Key Facts
- Working width: 60 inches
- Type: hydraulic rotary brush cutter
- Drive: high-flow hydraulic
- Application: brush, grass, light vegetation
- Mount: universal SSQA
- Weight: 500–1675 lbs
- Hydraulic flow: 25–35 GPM
Is This Right For You?
✅ Buy if…
- Your skid steer runs 25+ GPM high-flow hydraulics and you need maximum cutting power for heavy brush
- You're land clearing or maintaining overgrown acreage where standard-flow cutters bog down
- ROI matters — a high-flow cutter clears more per hour than a standard model on the right machine
⛔ Skip if…
- Your machine doesn't have high-flow — you'll get no performance benefit and may damage fittings
- You're doing light grass cutting — standard flow is sufficient and the attachment costs less
🔍 Also consider…
- Standard rotary cutter if your machine doesn't have high-flow auxiliary
- Brush mulcher/forestry mulcher if you need to process material over 4 inches diameter
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid to large-frame machines (S450–S750 class) are the best fit for this width.
About HLA in Canada
HLA Attachments is an Ontario-based manufacturer that designs and builds attachments in Waterloo, ON, with a dealer network spanning all provinces. Backed by a Canadian warranty and local parts availability, HLA is one of the most trusted names on Canadian job sites.
Care & Maintenance
- Inspect blade tips or flail hammers for wear after each use — dull cutting edges increase engine load and reduce cut quality significantly
- Check all blade bolts for proper torque before every use — loose blades on a high-RPM rotary cutter are a serious safety hazard
- Grease deck spindle bearings after every 8 hours of operation — spindle bearing failure is the most common and expensive rotary cutter repair
- Check the belt drive or hydraulic motor for overheating signs (excessive heat, smell) after extended cutting sessions in dense material
- Remove wrapped material (wire, twine, root) from around the rotor shaft after every use — wrapped material cuts through shaft seals and causes bearing contamination
How to Connect
- Attach rotary cutter frame using Bob-Tach
- Connect hydraulic couplers for motor
- Test blade rotation direction before cutting
- Keep 50m+ clear of bystanders — blade tip speed is extremely high
⚠ Safety NoteNever cut material larger than the blade rating. Rotary cutters eject debris at high velocity.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/rotary-cutters/hla-brush-cutter-60/
