Loftness BV84 84-Inch Brush Cutter for Skid Steers
🟡 High Flow
View on loftness.com →
Overview
Loftness's BV84 is an 84-inch brush cutter designed for high-flow skid steers doing production right-of-way and acreage brush management. The wide deck and direct-drive hydraulic motor handle thick grass, brush, and light saplings efficiently. Available in Canada through Loftness dealers.
Canada Availability
Available in Canada through Loftness dealers including New Holland and Case dealers.
Key Facts
- Model: Loftness BV84
- Working width: 84 inches
- Type: hydraulic brush cutter
- Drive: direct hydraulic motor
- Application: rights-of-way, high-production acreage clearing
- Mount: universal SSQA
- Weight: 700–2325 lbs
- Hydraulic flow: 15–25 GPM
Is This Right For You?
✅ Buy if…
- Your skid steer runs 25+ GPM high-flow hydraulics and you need maximum cutting power for heavy brush
- You're land clearing or maintaining overgrown acreage where standard-flow cutters bog down
- ROI matters — a high-flow cutter clears more per hour than a standard model on the right machine
⛔ Skip if…
- Your machine doesn't have high-flow — you'll get no performance benefit and may damage fittings
- You're doing light grass cutting — standard flow is sufficient and the attachment costs less
🔍 Also consider…
- Standard rotary cutter if your machine doesn't have high-flow auxiliary
- Brush mulcher/forestry mulcher if you need to process material over 4 inches diameter
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid to large-frame machines (S450–S750 class) are the best fit for this width.
About Loftness in Canada
Loftness is a US manufacturer of vegetation management and grain handling equipment, with a strong reputation for rotary cutters and brush cutters. Their products are available through select Canadian dealers and are well-regarded in agricultural and land management applications.
Care & Maintenance
- Inspect blade tips or flail hammers for wear after each use — dull cutting edges increase engine load and reduce cut quality significantly
- Check all blade bolts for proper torque before every use — loose blades on a high-RPM rotary cutter are a serious safety hazard
- Grease deck spindle bearings after every 8 hours of operation — spindle bearing failure is the most common and expensive rotary cutter repair
- Check the belt drive or hydraulic motor for overheating signs (excessive heat, smell) after extended cutting sessions in dense material
- Remove wrapped material (wire, twine, root) from around the rotor shaft after every use — wrapped material cuts through shaft seals and causes bearing contamination
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/rotary-cutters/loftness-bv84-brush-cutter/
