TMG-SBC60 60-Inch Skid Steer Brush Cutter💚 Budget
🟡 High Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
View on tmgindustrial.ca →
Overview
The TMG-SBC60 is a 60-inch hydraulic brush cutter from Canadian manufacturer TMG Industrial. Brush cutters handle standing vegetation that a bucket can't push — overgrown fields, fence lines, acreage maintenance, and light saplings. The 60-inch width works on mid-frame skid steers running high-flow hydraulics. TMG Industrial's direct-to-customer Canadian shipping model keeps cost of acquisition down compared to dealer-only channels. Confirm your machine's high-flow GPM before ordering.
Canada Availability
Available direct from TMG Industrial (tmgindustrial.ca) with Canadian shipping from Canadian distribution warehouses.
Key Facts
- Working width: 60 inches
- Hydraulics required: high flow
- Application: brush, standing vegetation, fence lines, acreage maintenance
- Universal SSQA skid steer quick attach mount
- Note: verify your machine's high-flow GPM — brush cutters typically require 18–30 GPM
Is This Right For You?
✅ Buy if…
- Your skid steer runs 25+ GPM high-flow hydraulics and you need maximum cutting power for heavy brush
- You're land clearing or maintaining overgrown acreage where standard-flow cutters bog down
- ROI matters — a high-flow cutter clears more per hour than a standard model on the right machine
⛔ Skip if…
- Your machine doesn't have high-flow — you'll get no performance benefit and may damage fittings
- You're doing light grass cutting — standard flow is sufficient and the attachment costs less
🔍 Also consider…
- Standard rotary cutter if your machine doesn't have high-flow auxiliary
- Brush mulcher/forestry mulcher if you need to process material over 4 inches diameter
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid to large-frame machines (S450–S750 class) are the best fit for this width.
About TMG Industrial in Canada
TMG Industrial imports and distributes a broad range of construction attachments from its Canadian warehouses, offering competitive pricing with delivery across Canada. A popular choice for contractors who want solid value without long lead times.
Care & Maintenance
- Inspect blade tips or flail hammers for wear after each use — dull cutting edges increase engine load and reduce cut quality significantly
- Check all blade bolts for proper torque before every use — loose blades on a high-RPM rotary cutter are a serious safety hazard
- Grease deck spindle bearings after every 8 hours of operation — spindle bearing failure is the most common and expensive rotary cutter repair
- Check the belt drive or hydraulic motor for overheating signs (excessive heat, smell) after extended cutting sessions in dense material
- Remove wrapped material (wire, twine, root) from around the rotor shaft after every use — wrapped material cuts through shaft seals and causes bearing contamination
How to Connect
- Attach rotary cutter frame using Bob-Tach
- Connect hydraulic couplers for motor
- Test blade rotation direction before cutting
- Keep 50m+ clear of bystanders — blade tip speed is extremely high
⚠ Safety NoteNever cut material larger than the blade rating. Rotary cutters eject debris at high velocity.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/rotary-cutters/tmg-sbc60-brush-cutter/
