TMG-SBC96 96-Inch Brush Cutter for Skid Steers💚 Budget
🟡 High Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
⚠ Too heavy for most small-frame machines
✓ Best on mid-frame or large-frame machines
View on tmgindustrial.ca →
Overview
The 96-inch-inch rotary cutter (brush hog) clears tall grass, light brush, saplings, and overgrown fence lines on Canadian acreages and road allowances. TMG Industrial is a Canadian company based in BC with a nationwide dealer network and direct online sales, making parts and support easy to access across Canada. A high-inertia blade deck absorbs impacts from hidden rocks and stumps better than disc mulchers. Best matched to skid steers with adequate hydraulic flow. Available direct from TMG Industrial Canada (tmgindustrial.ca).
Canada Availability
Available direct from TMG Industrial Canada (tmgindustrial.ca).
Key Facts
- Model: TMG-SBC96
- Working width: 96 inches
- Type: hydraulic brush cutter
- Drive: high-flow hydraulic
- Application: high-production brush, rights-of-way, acreages
- Mount: universal SSQA
- Weight: 800–2675 lbs
- Hydraulic flow: 25–35 GPM
Is This Right For You?
✅ Buy if…
- You're clearing overgrown fields, brush lines, or rights-of-way with vegetation up to 3 inches diameter
- You want a single attachment that handles both heavy brush and coarse grass cutting
- Your acreage management work doesn't justify a dedicated forestry mulcher
⛔ Skip if…
- You need to cut trees or woody material over 4 inches — a brush mulcher handles that range better
- Fine-cut finish quality matters — flail mowers produce a much finer cut with less scatter
🔍 Also consider…
- Flail mower for finer mulching and safer operation near structures
- Forestry mulcher/brush mulcher for material over 4 inches diameter
🔧 Machine Compatibility
Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Best suited to large-frame machines (S750+ class or equivalent CTL).
About TMG Industrial in Canada
TMG Industrial imports and distributes a broad range of construction attachments from its Canadian warehouses, offering competitive pricing with delivery across Canada. A popular choice for contractors who want solid value without long lead times.
Care & Maintenance
- Inspect blade tips or flail hammers for wear after each use — dull cutting edges increase engine load and reduce cut quality significantly
- Check all blade bolts for proper torque before every use — loose blades on a high-RPM rotary cutter are a serious safety hazard
- Grease deck spindle bearings after every 8 hours of operation — spindle bearing failure is the most common and expensive rotary cutter repair
- Check the belt drive or hydraulic motor for overheating signs (excessive heat, smell) after extended cutting sessions in dense material
- Remove wrapped material (wire, twine, root) from around the rotor shaft after every use — wrapped material cuts through shaft seals and causes bearing contamination
How to Connect
- Attach rotary cutter frame using Bob-Tach
- Connect hydraulic couplers for motor
- Test blade rotation direction before cutting
- Keep 50m+ clear of bystanders — blade tip speed is extremely high
⚠ Safety NoteNever cut material larger than the blade rating. Rotary cutters eject debris at high velocity.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/rotary-cutters/tmg-sbc96-brush-cutter/
