Virnig V50 72-Inch Skid Steer Brush Cutter🔵 Mid
🟢 Standard Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
View on virnigmfg.com →
Overview
The Virnig V50 72-inch brush cutter is a standard-deck rotary cutter for full-size skid steers clearing brush, tall grass, and overgrown vegetation. Virnig builds their V50 line to heavy-duty tolerances, with a direct-drive Eaton motor rated up to 25 GPM and dual hydraulic pressure relief valves for protection. Ships to Canada through authorized North American dealers.
Canada Availability
Virnig attachments ship to Canada and are available through authorized North American dealers.
Key Facts
- Model: V50 Brush Cutter
- Working width: 72 inches
- Type: rotary brush cutter
- Drive: direct-drive Eaton motor, up to 25 GPM
- Dual hydraulic pressure relief valves
- Application: brush, tall grass, light vegetation clearing
- Compatible: full-size skid steers with SSQA mount
Is This Right For You?
✅ Buy if…
- You're clearing overgrown fields, brush lines, or rights-of-way with vegetation up to 3 inches diameter
- You want a single attachment that handles both heavy brush and coarse grass cutting
- Your acreage management work doesn't justify a dedicated forestry mulcher
⛔ Skip if…
- You need to cut trees or woody material over 4 inches — a brush mulcher handles that range better
- Fine-cut finish quality matters — flail mowers produce a much finer cut with less scatter
🔍 Also consider…
- Flail mower for finer mulching and safer operation near structures
- Forestry mulcher/brush mulcher for material over 4 inches diameter
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid to large-frame machines (S450–S750 class) are the best fit for this width.
About Virnig in Canada
Virnig Manufacturing is a Minnesota-based producer known for consistent build quality and a wide model range. Their attachments ship to Canadian dealers regularly and are a common sight on Western and Prairie job sites.
Care & Maintenance
- Inspect blade tips or flail hammers for wear after each use — dull cutting edges increase engine load and reduce cut quality significantly
- Check all blade bolts for proper torque before every use — loose blades on a high-RPM rotary cutter are a serious safety hazard
- Grease deck spindle bearings after every 8 hours of operation — spindle bearing failure is the most common and expensive rotary cutter repair
- Check the belt drive or hydraulic motor for overheating signs (excessive heat, smell) after extended cutting sessions in dense material
- Remove wrapped material (wire, twine, root) from around the rotor shaft after every use — wrapped material cuts through shaft seals and causes bearing contamination
How to Connect
- Attach rotary cutter frame using Bob-Tach
- Connect hydraulic couplers for motor
- Test blade rotation direction before cutting
- Keep 50m+ clear of bystanders — blade tip speed is extremely high
⚠ Safety NoteNever cut material larger than the blade rating. Rotary cutters eject debris at high velocity.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/rotary-cutters/virnig-brush-cutter-72/
