Virnig V60 IRC78 Open Front Rotary Brush Cutter 78-Inch🔵 Mid
🟡 High Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
⚠ Too heavy for most small-frame machines
✓ Best on mid-frame or large-frame machines
View on virnigmfg.com →
Overview
Virnig's V60 IRC78 is a 78-inch industrial open-front brush cutter designed for land clearing services cutting trees up to 8 inches in diameter. The wider 78-inch deck covers more ground per pass compared to the 72-inch model. The circular flywheel with 4 double-sided blades, hydraulic braking, and five motor options for standard to high flow/high pressure applications make this a versatile and capable land clearing tool. Ships to Canada through authorized Virnig dealers.
Canada Availability
Virnig attachments available through authorized North American dealers shipping to Canada.
Key Facts
- Model: IRC78
- Cut width: 78 inches
- Overall width: 84 inches
- Cutting capacity: up to 8" diameter
- Flywheel: circular with 4 double-sided blades
- Hydraulic braking: stops within 25 seconds
- Flow: 20-25 GPM standard / 25-45 GPM high flow
- Weight: approx. 2,295 lbs
- Recommended loader capacity: greater than 2,200 lbs
- Skid shoes: AR400, replaceable
Is This Right For You?
✅ Buy if…
- You're cutting dense brush and saplings up to 4 inches at the stem — open-front design lets material feed through
- You work along fence lines, roadsides, or overgrown property boundaries where brush builds up
- Mulching the cut material in place is acceptable — no bagging or raking required
⛔ Skip if…
- You're mowing maintained grass or light vegetation — a standard rotary cutter is cheaper and simpler
- Your machine is under 60 HP — open-front brush cutters work best with adequate flow and mass
🔍 Also consider…
- Standard rotary cutter for grass and light vegetation maintenance
- Flail mower if you want finer mulching and lower discharge risk near people or structures
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid to large-frame machines (S450–S750 class) are the best fit for this width.
About Virnig in Canada
Virnig Manufacturing is a Minnesota-based producer known for consistent build quality and a wide model range. Their attachments ship to Canadian dealers regularly and are a common sight on Western and Prairie job sites.
Care & Maintenance
- Inspect blade tips or flail hammers for wear after each use — dull cutting edges increase engine load and reduce cut quality significantly
- Check all blade bolts for proper torque before every use — loose blades on a high-RPM rotary cutter are a serious safety hazard
- Grease deck spindle bearings after every 8 hours of operation — spindle bearing failure is the most common and expensive rotary cutter repair
- Check the belt drive or hydraulic motor for overheating signs (excessive heat, smell) after extended cutting sessions in dense material
- Remove wrapped material (wire, twine, root) from around the rotor shaft after every use — wrapped material cuts through shaft seals and causes bearing contamination
How to Connect
- Attach rotary cutter frame using Bob-Tach
- Connect hydraulic couplers for motor
- Test blade rotation direction before cutting
- Keep 50m+ clear of bystanders — blade tip speed is extremely high
⚠ Safety NoteNever cut material larger than the blade rating. Rotary cutters eject debris at high velocity.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/rotary-cutters/virnig-v60-brush-cutter-78/
