Virnig V60 72-Inch Rotary Cutter for Skid Steers🔵 Mid
🟡 High Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
⚠ Too heavy for most small-frame machines
✓ Best on mid-frame or large-frame machines
View on virnig.com →
Overview
The 72-inch-inch rotary cutter (brush hog) clears tall grass, light brush, saplings, and overgrown fence lines on Canadian acreages and road allowances. Virnig Manufacturing (Minnesota) is well regarded in Canada for heavy-duty skid steer attachments, available through Canadian equipment dealers. A high-inertia blade deck absorbs impacts from hidden rocks and stumps better than disc mulchers. Best matched to skid steers with adequate hydraulic flow. Available in Canada through Virnig's Canadian dealer network.
Canada Availability
Available in Canada through Virnig's Canadian dealer network.
Key Facts
- Working width: 72 inches
- Type: hydraulic rotary cutter
- Drive: high-flow hydraulic
- Application: brush, grass, acreage maintenance
- Mount: universal SSQA
- Weight: 600–2000 lbs
- Hydraulic flow: 25–35 GPM
✅ Specs sourced from virnig.com · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- Your skid steer runs 25+ GPM high-flow hydraulics and you need maximum cutting power for heavy brush
- You're land clearing or maintaining overgrown acreage where standard-flow cutters bog down
- ROI matters — a high-flow cutter clears more per hour than a standard model on the right machine
⛔ Skip if…
- Your machine doesn't have high-flow — you'll get no performance benefit and may damage fittings
- You're doing light grass cutting — standard flow is sufficient and the attachment costs less
🔍 Also consider…
- Standard rotary cutter if your machine doesn't have high-flow auxiliary
- Brush mulcher/forestry mulcher if you need to process material over 4 inches diameter
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid to large-frame machines (S450–S750 class) are the best fit for this width.
About Virnig in Canada
Virnig Manufacturing is a Minnesota-based producer known for consistent build quality and a wide model range. Their attachments ship to Canadian dealers regularly and are a common sight on Western and Prairie job sites.
Care & Maintenance
- Inspect blade tips or flail hammers for wear after each use — dull cutting edges increase engine load and reduce cut quality significantly
- Check all blade bolts for proper torque before every use — loose blades on a high-RPM rotary cutter are a serious safety hazard
- Grease deck spindle bearings after every 8 hours of operation — spindle bearing failure is the most common and expensive rotary cutter repair
- Check the belt drive or hydraulic motor for overheating signs (excessive heat, smell) after extended cutting sessions in dense material
- Remove wrapped material (wire, twine, root) from around the rotor shaft after every use — wrapped material cuts through shaft seals and causes bearing contamination
How to Connect
- Attach rotary cutter frame using Bob-Tach
- Connect hydraulic couplers for motor
- Test blade rotation direction before cutting
- Keep 50m+ clear of bystanders — blade tip speed is extremely high
⚠ Safety NoteNever cut material larger than the blade rating. Rotary cutters eject debris at high velocity.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/rotary-cutters/virnig-v60-rotary-cutter-72/
