Cat Work Tools Skid Steer Snow BladePremium
🟢 Standard Flow
View on cat.com →
Overview
Cat Work Tools offers a hydraulic angling snow blade for Cat skid steers and CTLs. The hydraulic angle adjustment allows operators to direct snow to the left or right while maintaining forward travel. Used across Canada for parking lot snow removal, road clearing, and site maintenance. Cat's national dealer network provides service and parts support.
Canada Availability
Available through Cat Work Tools dealers across Canada.
Key Facts
- Brand: Cat Work Tools
- Type: hydraulic angling snow blade
- Hydraulic: full hydraulic angle adjustment
- Mount: Cat quick attach (BOCE)
- Application: parking lot snow removal, road clearing, site maintenance
- Weight: 300–900 lbs
- Hydraulic flow: 10–15 GPM
Is This Right For You?
✅ Buy if…
- You clear laneways, farm roads, or municipal paths where you need to cast snow to one side
- Your site has curbs or obstacles — trip-edge protection prevents costly blade and pin damage
- You want hydraulic angle adjustment from the cab without stopping to reposition
⛔ Skip if…
- You're clearing open lots — a box pusher or straight blade is more efficient for pure containment
- Budget is tight and your site is obstacle-free — a straight blade costs less and works fine
🔍 Also consider…
- Straight snow blade if your sites are flat and obstacle-free
- Box snow pusher for high-volume commercial lot clearing
🔧 Machine Compatibility
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About Cat in Canada
Caterpillar attachments are backed by the largest dealer network in Canada, with service centres in every major city. OEM quality with the assurance of nationwide parts and support.
Care & Maintenance
- Grease all cylinder pin fittings and pivot points before each snow season — cold temperature makes inadequately lubricated joints seize
- Inspect the cutting edge for wear and replace before it's worn through to the blade frame — a thinned edge transfers frost heave impacts directly to the frame and coupler
- Rinse salt off the blade after every use and before any storage period longer than a week — salt attack on bare steel is measurably faster than most operators expect
- Inspect hydraulic angle cylinder hoses before each season and replace any cracked or weathered hoses — cold-hardened hoses split at the worst moment
- Store in a dry location with the cutting edge off wet ground — standing water under a stored blade rusts the edge from below and weakens it before the next season
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/snow-blades/cat-snow-blade/