Arctic 12-Foot Box Snow Pusher for Skid Steers
View on arcticsnow.com →
Overview
The 12-foot-foot snow pusher clears large paved areas — parking lots, loading docks, industrial yards — in fewer passes than a bucket or blade. Arctic Snow & Ice Control attachments are available through Canadian equipment dealers and distributors. The sectional containment design keeps snow moving in front of the blade without spillover. Compatible with most mid-frame and large-frame skid steers via SSQA. Available in Canada through Arctic Snow & Ice Control dealers.
Canada Availability
Available in Canada through Arctic Snow & Ice Control dealers.
Key Facts
- Working width: 12 feet
- Type: box snow pusher
- Application: commercial lots, large machines
- Mount: universal SSQA
- Typical weight: 650–850 lbs
- Hydraulic flow: none required — passive attachment, no auxiliary hydraulics
Is This Right For You?
✅ Buy if…
- You push snow on flat commercial lots, parking decks, or loading docks with a defined push perimeter
- You don't have room or budget for a blower — pushers cost far less and maintain well
⛔ Skip if…
- Your site has no windrow drop zone — pushers pile snow that has to go somewhere
- Wet, heavy Ontario snow is your primary challenge — heavy packs reduce machine traction with a full pusher
🔍 Also consider…
- Sectional pusher if your site has frost heaves or uneven pavement you need the wings to follow
- Snow blower attachment if bank height from repeated pushes is becoming a problem
🔧 Machine Compatibility
Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.
About Arctic Snow & Ice Control in Canada
Arctic Snow & Ice Control is a US manufacturer specializing in sectional steel snow pushers and box blades for commercial snow management. Their products are available through dealers in Canada and are built for the heavy-use demands of commercial parking lot and property maintenance operations.
Care & Maintenance
- Inspect the trip-edge blade for wear before each season and replace when worn below the wear indicator line — a worn-through trip-edge transfers full impact to the blade frame
- Grease all trip-edge pivot and hinge points after every major pushing session, especially after work in extreme cold where grease migrates out of joints faster
- Check side board welds for cracking after frost heave strikes — box sides bear significant impact forces during high-speed frost heave hits
- Rinse salt off after every use and before extended storage — road salt accelerates rust on unpainted steel edges and frame members faster than people expect
- Store off the ground on blocks or a pallet to prevent the cutting edge from sitting in standing water and rusting from below
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/snow-pushers/arctic-box-pusher-12ft/
