Arctic Sectional Sno-Pusher 10-Foot Snow Pusher for Skid Steers
View on arcticsnowandice.com →
Overview
The Arctic Sectional Sno-Pusher at 10 feet is a mid-large containment pusher using Arctic's independent sectional design, where each section of the blade can flex independently to follow uneven pavement and maintain full blade contact. This results in a cleaner scrape on rough or heaved asphalt — a critical advantage in Canadian parking lots that undergo frost heaving. Arctic pushers are distributed through Canadian commercial snow equipment dealers.
Canada Availability
Available in Canada through authorized Arctic Snow & Ice Control dealers.
Key Facts
- Working width: 120 inches (10 feet)
- Type: sectional containment snow pusher
- Feature: independent blade sections follow pavement contours
- Application: commercial lots with uneven or frost-heaved asphalt
- Cutting edge: replaceable rubber or steel sections
- Typical weight: 550–700 lbs
- Hydraulic flow: none required — passive attachment, no auxiliary hydraulics
Is This Right For You?
✅ Buy if…
- Your lot has uneven pavement, frost heaves, or expansion joints that a rigid pusher would dig into
- You want to minimize scraping damage to the pavement surface
⛔ Skip if…
- Your site is smooth and flat — a standard box pusher is simpler and cheaper
- The higher purchase price doesn't pencil out for occasional residential use
🔍 Also consider…
- Standard box pusher for flat, uniform lots
- Snow blade if you need angle control to push snow to a specific side
🔧 Machine Compatibility
Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.
About Arctic Snow & Ice Control in Canada
Arctic Snow & Ice Control is a US manufacturer specializing in sectional steel snow pushers and box blades for commercial snow management. Their products are available through dealers in Canada and are built for the heavy-use demands of commercial parking lot and property maintenance operations.
Care & Maintenance
- Inspect the trip-edge blade for wear before each season and replace when worn below the wear indicator line — a worn-through trip-edge transfers full impact to the blade frame
- Grease all trip-edge pivot and hinge points after every major pushing session, especially after work in extreme cold where grease migrates out of joints faster
- Check side board welds for cracking after frost heave strikes — box sides bear significant impact forces during high-speed frost heave hits
- Rinse salt off after every use and before extended storage — road salt accelerates rust on unpainted steel edges and frame members faster than people expect
- Store off the ground on blocks or a pallet to prevent the cutting edge from sitting in standing water and rusting from below
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/snow-pushers/arctic-sectional-sno-pusher-10ft/
