Cat Work Tools Skid Steer Snow PusherPremium
View on cat.com →
Overview
Cat Work Tools offers a snow pusher (containment plow) for Cat skid steers and CTLs. The box-shaped open-back design contains snow as it's pushed, reducing spillage on parking lots and commercial sites. A preferred tool for Canadian commercial snow removal contractors on large paved surfaces. Available through Cat dealers across Canada.
Canada Availability
Available through Cat Work Tools dealers across Canada.
Key Facts
- Brand: Cat Work Tools
- Type: snow pusher / containment plow
- Design: open-back box containment
- Mount: Cat quick attach (BOCE)
- Application: commercial parking lots, large paved areas, snow containment
- Typical weight: 650 lbs
- Hydraulic flow: none required — passive attachment, no auxiliary hydraulics
Is This Right For You?
✅ Buy if…
- You push snow on flat commercial lots, parking decks, or loading docks with a defined push perimeter
- You don't have room or budget for a blower — pushers cost far less and maintain well
⛔ Skip if…
- Your site has no windrow drop zone — pushers pile snow that has to go somewhere
- Wet, heavy Ontario snow is your primary challenge — heavy packs reduce machine traction with a full pusher
🔍 Also consider…
- Sectional pusher if your site has frost heaves or uneven pavement you need the wings to follow
- Snow blower attachment if bank height from repeated pushes is becoming a problem
🔧 Machine Compatibility
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About Cat in Canada
Caterpillar attachments are backed by the largest dealer network in Canada, with service centres in every major city. OEM quality with the assurance of nationwide parts and support.
Care & Maintenance
- Inspect the trip-edge blade for wear before each season and replace when worn below the wear indicator line — a worn-through trip-edge transfers full impact to the blade frame
- Grease all trip-edge pivot and hinge points after every major pushing session, especially after work in extreme cold where grease migrates out of joints faster
- Check side board welds for cracking after frost heave strikes — box sides bear significant impact forces during high-speed frost heave hits
- Rinse salt off after every use and before extended storage — road salt accelerates rust on unpainted steel edges and frame members faster than people expect
- Store off the ground on blocks or a pallet to prevent the cutting edge from sitting in standing water and rusting from below
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/snow-pushers/cat-snow-pusher/