HLA 2500 Series 8-Foot Snow Pusher
View on hlaattachments.com →
Overview
HLA's 2500 series 8-foot snow pusher is the most popular mid-duty pusher in the HLA lineup for Canadian commercial operators on mid-frame skid steers. Includes back-drag bar as standard. Ontario-manufactured by Horst Welding in Listowel, Ontario, and stocked through Langner Equipment at approximately $3,800 CAD. The 8-foot width handles most commercial lot snow on machines in the 60-90 HP range.
Canada Availability
Ontario-manufactured by Horst Welding. Available through HLA dealers and Langner Equipment in Canada at approximately $3,800 CAD.
Key Facts
- Model: HLA 2500 Series 8'
- Working width: 8 feet
- Includes back-drag bar standard
- Application: mid-frame machines, commercial lots, farm yards
- Ontario-manufactured by Horst Welding (Listowel, ON)
- SSQA skid steer quick attach
- Typical weight: 450–580 lbs
- Hydraulic flow: none required — passive attachment, no auxiliary hydraulics
Is This Right For You?
✅ Buy if…
- You push snow on flat commercial lots, parking decks, or loading docks with a defined push perimeter
- You don't have room or budget for a blower — pushers cost far less and maintain well
⛔ Skip if…
- Your site has no windrow drop zone — pushers pile snow that has to go somewhere
- Wet, heavy Ontario snow is your primary challenge — heavy packs reduce machine traction with a full pusher
🔍 Also consider…
- Sectional pusher if your site has frost heaves or uneven pavement you need the wings to follow
- Snow blower attachment if bank height from repeated pushes is becoming a problem
🔧 Machine Compatibility
Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.
About HLA in Canada
HLA Attachments is an Ontario-based manufacturer that designs and builds attachments in Waterloo, ON, with a dealer network spanning all provinces. Backed by a Canadian warranty and local parts availability, HLA is one of the most trusted names on Canadian job sites.
Care & Maintenance
- Inspect the trip-edge blade for wear before each season and replace when worn below the wear indicator line — a worn-through trip-edge transfers full impact to the blade frame
- Grease all trip-edge pivot and hinge points after every major pushing session, especially after work in extreme cold where grease migrates out of joints faster
- Check side board welds for cracking after frost heave strikes — box sides bear significant impact forces during high-speed frost heave hits
- Rinse salt off after every use and before extended storage — road salt accelerates rust on unpainted steel edges and frame members faster than people expect
- Store off the ground on blocks or a pallet to prevent the cutting edge from sitting in standing water and rusting from below
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/snow-pushers/hla-sp2500-snow-pusher-8ft/
