HLA SP350009 108-Inch 3500 Series Snow Pusher
View on hlasnow.com →
Overview
The HLA SP350009 is a 108-inch (9-foot) snow pusher from HLA's 3500 Series, designed for the upper range of skid steers and compact wheel loaders up to 15,000 lbs. The 9-foot width is a common choice for larger commercial parking lots in Canada where machine size allows the wider blade. Ontario-built by HLA Attachments with a spring trip cutting edge to protect against curbs and frost heaves. Steel edge is reversible and replaceable in the field.
Canada Availability
Available in Canada through HLA Attachments and HLA Snow dealers. Ontario-manufactured by Horst Welding.
Key Facts
- Pusher width: 108 inches (9 feet)
- Mouldboard height: 38 inches
- Depth: 36 inches
- Weight: approximately 1,130 lbs
- Maximum operating weight of carrier: 15,000 lbs
- Cutting edge: steel, replaceable and reversible
- Spring trip cutting edge
- AR400 adjustable steel skid bars
- Double sidewall construction
- 2-year commercial warranty
- Hydraulic flow: none required — passive attachment, no auxiliary hydraulics
Is This Right For You?
✅ Buy if…
- You push snow on flat commercial lots, parking decks, or loading docks with a defined push perimeter
- You don't have room or budget for a blower — pushers cost far less and maintain well
⛔ Skip if…
- Your site has no windrow drop zone — pushers pile snow that has to go somewhere
- Wet, heavy Ontario snow is your primary challenge — heavy packs reduce machine traction with a full pusher
🔍 Also consider…
- Sectional pusher if your site has frost heaves or uneven pavement you need the wings to follow
- Snow blower attachment if bank height from repeated pushes is becoming a problem
🔧 Machine Compatibility
Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.
About HLA in Canada
HLA Attachments is an Ontario-based manufacturer that designs and builds attachments in Waterloo, ON, with a dealer network spanning all provinces. Backed by a Canadian warranty and local parts availability, HLA is one of the most trusted names on Canadian job sites.
Care & Maintenance
- Inspect the trip-edge blade for wear before each season and replace when worn below the wear indicator line — a worn-through trip-edge transfers full impact to the blade frame
- Grease all trip-edge pivot and hinge points after every major pushing session, especially after work in extreme cold where grease migrates out of joints faster
- Check side board welds for cracking after frost heave strikes — box sides bear significant impact forces during high-speed frost heave hits
- Rinse salt off after every use and before extended storage — road salt accelerates rust on unpainted steel edges and frame members faster than people expect
- Store off the ground on blocks or a pallet to prevent the cutting edge from sitting in standing water and rusting from below
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/snow-pushers/hla-sp350009-snow-pusher/
