HLA SP3500EF210 120-Inch 3500 Series EdgeFlex Snow Pusher
View on hlasnow.com →
Overview
The HLA SP3500EF210 is a 120-inch (10-foot) EdgeFlex snow pusher from Ontario-based HLA Attachments — the widest standard EdgeFlex model in the 3500 Series. EdgeFlex segmented edges provide superior surface contact on uneven pavement while maintaining commercial-grade scraping performance. At 10 feet wide with a 1,390 lb weight, this is built for large-frame commercial operators running their largest pushers.
Canada Availability
Available in Canada through HLA Attachments and HLA Snow dealers. Ontario-manufactured.
Key Facts
- Pusher width: 120 inches (10 feet)
- Mouldboard height: 38 inches
- Weight: approximately 1,390 lbs
- Maximum operating weight of carrier: 15,000 lbs
- Cutting edge: EdgeFlex segmented
- Spring trip cutting edge
- AR400 skid bars
- 2-year commercial warranty
- Hydraulic flow: none required — passive attachment, no auxiliary hydraulics
Is This Right For You?
✅ Buy if…
- Your lot has uneven pavement, frost heaves, or expansion joints that a rigid pusher would dig into
- You want to minimize scraping damage to the pavement surface
⛔ Skip if…
- Your site is smooth and flat — a standard box pusher is simpler and cheaper
- The higher purchase price doesn't pencil out for occasional residential use
🔍 Also consider…
- Standard box pusher for flat, uniform lots
- Snow blade if you need angle control to push snow to a specific side
🔧 Machine Compatibility
Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.
About HLA in Canada
HLA Attachments is an Ontario-based manufacturer that designs and builds attachments in Waterloo, ON, with a dealer network spanning all provinces. Backed by a Canadian warranty and local parts availability, HLA is one of the most trusted names on Canadian job sites.
Care & Maintenance
- Inspect the trip-edge blade for wear before each season and replace when worn below the wear indicator line — a worn-through trip-edge transfers full impact to the blade frame
- Grease all trip-edge pivot and hinge points after every major pushing session, especially after work in extreme cold where grease migrates out of joints faster
- Check side board welds for cracking after frost heave strikes — box sides bear significant impact forces during high-speed frost heave hits
- Rinse salt off after every use and before extended storage — road salt accelerates rust on unpainted steel edges and frame members faster than people expect
- Store off the ground on blocks or a pallet to prevent the cutting edge from sitting in standing water and rusting from below
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/snow-pushers/hla-sp3500ef210-snow-pusher/
