Metal Pless LiveBoxx Snow Pusher for Skid Steers
View on metalpless.com →
Overview
The Metal Pless LiveBoxx is a snow box pusher for skid steers, backhoes, and wheel loaders, featuring the company's patented LiveEdge cutting edge system. Made in Quebec, the LiveBoxx is designed for commercial and airport-grade snow clearing where scraping performance on uneven pavement is critical. The LiveEdge segments float independently to maintain contact with surface imperfections, significantly reducing the residual snow and ice left behind compared to a standard rigid cutting edge. Suited to contractors working commercial lots, drive-throughs, and institutional properties.
Canada Availability
Manufactured in Quebec by Metal Pless. Available through Canadian dealers. Metal Pless serves commercial, municipal, and airport operators across Canada.
Key Facts
- Attachment type: snow box pusher
- Compatible with: skid steers, backhoes, wheel loaders
- Patented LiveEdge cutting edge — independently floating segments for superior surface contact
- Application: commercial lots, airport ramps, institutional properties
- Made in Quebec, Canada
- Available in sizes for various machine weights
- Hydraulic flow: none required — passive attachment, no auxiliary hydraulics
Is This Right For You?
✅ Buy if…
- You move snow on commercial or residential properties and want a high-volume, low-pass attachment
- You already own a skid steer and want to add snow clearing without a dedicated machine
⛔ Skip if…
- Your site has no room for a windrow — pushers need a drop zone
- You need to move snow over a distance or over a bank — a blower or truck setup handles that better
🔍 Also consider…
- Snow blower attachment if bank management is a regular issue
- Snow blade if road clearing and angle control matter more than containment
🔧 Machine Compatibility
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About Metal Pless in Canada
Metal Pless is a Quebec manufacturer specializing in snow management equipment. Their snow blades, pushers, and winter maintenance products are designed specifically for Canadian conditions — heavy wet snow, freeze-thaw cycles, and the kind of winter that other brands' products weren't designed for. Metal Pless has a strong following among Canadian snow contractors.
Care & Maintenance
- Inspect the trip-edge blade for wear before each season and replace when worn below the wear indicator line — a worn-through trip-edge transfers full impact to the blade frame
- Grease all trip-edge pivot and hinge points after every major pushing session, especially after work in extreme cold where grease migrates out of joints faster
- Check side board welds for cracking after frost heave strikes — box sides bear significant impact forces during high-speed frost heave hits
- Rinse salt off after every use and before extended storage — road salt accelerates rust on unpainted steel edges and frame members faster than people expect
- Store off the ground on blocks or a pallet to prevent the cutting edge from sitting in standing water and rusting from below
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/snow-pushers/metal-pless-liveboxx-skid-steer/
