Metal Pless PlowMaxx Snow Pusher for Skid Steers
View on metal-pless.com →
Overview
The Metal Pless PlowMaxx is a commercial snow pusher designed for loaders and skid steers from 5,000 to 25,000 lbs, with model sizes scaled to match machine weight. Built in Quebec by Metal Pless, a leading Canadian snow management equipment manufacturer, the PlowMaxx features the patented LiveEdge cutting edge — a floating segmented edge that follows road and pavement imperfections, reducing salt and abrasive use by up to 50%. The compact design is suited to smaller contracts and tight areas. Available with hydraulic wings and angle options on larger models.
Canada Availability
Manufactured in Quebec by Metal Pless. Available through Canadian dealers — Metal Pless is a Quebec-based company serving commercial and municipal operators across Canada.
Key Facts
- Machine compatibility: skid steers from approximately 5,000 lbs operating weight
- Patented LiveEdge cutting edge system — follows pavement imperfections
- Mobile steel trip edge — reduces salt use by up to 50%
- Compact format for small contracts and tight areas
- Sizes available to match machine operating weight from 5,000 to 25,000 lbs
- Optional hydraulic wings and angle on larger models
- Made in Quebec, Canada
- Hydraulic flow: none required — passive attachment, no auxiliary hydraulics
Is This Right For You?
✅ Buy if…
- You push snow on flat commercial lots, parking decks, or loading docks with a defined push perimeter
- You don't have room or budget for a blower — pushers cost far less and maintain well
⛔ Skip if…
- Your site has no windrow drop zone — pushers pile snow that has to go somewhere
- Wet, heavy Ontario snow is your primary challenge — heavy packs reduce machine traction with a full pusher
🔍 Also consider…
- Sectional pusher if your site has frost heaves or uneven pavement you need the wings to follow
- Snow blower attachment if bank height from repeated pushes is becoming a problem
🔧 Machine Compatibility
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About Metal Pless in Canada
Metal Pless is a Quebec manufacturer specializing in snow management equipment. Their snow blades, pushers, and winter maintenance products are designed specifically for Canadian conditions — heavy wet snow, freeze-thaw cycles, and the kind of winter that other brands' products weren't designed for. Metal Pless has a strong following among Canadian snow contractors.
Care & Maintenance
- Inspect the trip-edge blade for wear before each season and replace when worn below the wear indicator line — a worn-through trip-edge transfers full impact to the blade frame
- Grease all trip-edge pivot and hinge points after every major pushing session, especially after work in extreme cold where grease migrates out of joints faster
- Check side board welds for cracking after frost heave strikes — box sides bear significant impact forces during high-speed frost heave hits
- Rinse salt off after every use and before extended storage — road salt accelerates rust on unpainted steel edges and frame members faster than people expect
- Store off the ground on blocks or a pallet to prevent the cutting edge from sitting in standing water and rusting from below
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/snow-pushers/metal-pless-plowmaxx-skid-steer/
