SnowWolf UltraPusherTE 132-Inch Skid Steer Snow Pusher⭐ Premium
✓ No hydraulics required
✗ Too heavy for small & mid-frame machines
✓ Requires large-frame or XL machine
View on lecinfo.com →
Overview
The SnowWolf UltraPusherTE 132 (11-foot) is the largest of the UltraPusherTE size options and pushes serious snow volume on large-frame skid steers. At 132 inches wide, each pass covers a lot more ground, reducing trip count and fuel cost on large properties. The trip edge absorbs the shocks common on frost-heaved Canadian parking lots. Rated for machines from 6,000 to 15,000 lbs. Available through SnowWolf's Canadian distributor network.
Canada Availability
SnowWolf products available through Canadian dealers and distributors.
Key Facts
- Width: 132 inches (11 feet)
- Edge type: full-width trip edge (TE)
- Recommended machine weight: 6,000-15,000 lbs
- Application: large commercial and industrial snow removal
- Origin: Made in USA
- Hydraulic flow: none required — passive attachment, no auxiliary hydraulics
✅ Specs sourced from lecinfo.com · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- You push snow on flat commercial lots, parking decks, or loading docks with a defined push perimeter
- You don't have room or budget for a blower — pushers cost far less and maintain well
⛔ Skip if…
- Your site has no windrow drop zone — pushers pile snow that has to go somewhere
- Wet, heavy Ontario snow is your primary challenge — heavy packs reduce machine traction with a full pusher
🔍 Also consider…
- Sectional pusher if your site has frost heaves or uneven pavement you need the wings to follow
- Snow blower attachment if bank height from repeated pushes is becoming a problem
🔧 Machine Compatibility
Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.
About SnowWolf in Canada
SnowWolf is a US manufacturer focused exclusively on snow management equipment. Their UltraPlow and pusher products are known for heavy-duty construction and are used by commercial snow contractors across Canada. SnowWolf dealers are present in major Canadian markets, particularly in regions with high commercial snow clearing activity.
Care & Maintenance
- Inspect the trip-edge blade for wear before each season and replace when worn below the wear indicator line — a worn-through trip-edge transfers full impact to the blade frame
- Grease all trip-edge pivot and hinge points after every major pushing session, especially after work in extreme cold where grease migrates out of joints faster
- Check side board welds for cracking after frost heave strikes — box sides bear significant impact forces during high-speed frost heave hits
- Rinse salt off after every use and before extended storage — road salt accelerates rust on unpainted steel edges and frame members faster than people expect
- Store off the ground on blocks or a pallet to prevent the cutting edge from sitting in standing water and rusting from below
How to Connect
- Back machine into push frame receiver
- Lower boom to slide trip edges into receiver arms
- Engage mounting pins or latch
- Raise slightly off ground and test trip edge reset manually if accessible
⚠ Safety NoteSnow pushers are passive (no hydraulics) on most models — mounting is mechanical only
❄️ Before You Buy a Snow Pusher
Snow pusher sizing is machine-dependent — an oversized box overloads your loader arms; undersizing means extra passes on large lots.
- Match pusher width to your machine's ROC and tipping load Attachment sizing guide →
- Trip-edge vs sectional edge — trip edge for paved lots, sectional for uneven surfaces Snow pusher guide →
- Buy before November — Canadian dealers sell out of popular sizes by mid-winter
Find a Snow Pusher Dealer →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/snow-pushers/snowwolf-ultrapusher-te-132/
.jpg)
.png)
.jpg)