Virnig V60 VBW60 60-Inch Skid Steer Snow Blower
🟡 High Flow
View on virnigmfg.com →
Overview
Virnig's V60 VBW60 is a 60-inch skid steer snow blower with a paddle-style auger that outperforms spiral augers in dense, wet, or compacted snow — conditions common across most of Canada. The paddle auger aggressively intakes snow and resists clogging. The chute throws snow up to 40 feet and adjusts for direction. Available in standard flow or high flow versions. Recommended for loaders with more than 1,500 lb lift capacity. Ships to Canada through authorized Virnig dealers.
Canada Availability
Virnig attachments ship to Canada through authorized North American dealers.
Key Facts
- Model: VBW60
- Cut width: 64.7 inches
- Overall width: 67.2 inches
- Overall depth: 47.9 inches
- Max height with chute: 65 inches
- Fan diameter: 24 inches
- Auger diameter: 18 inches
- Auger type: paddle style
- Throw distance: up to 40 feet
- Recommended flow: 14-25 GPM standard / 25-45 GPM high flow
- Weight: approx. 1,140 lbs
- Recommended loader capacity: greater than 1,500 lbs
Is This Right For You?
✅ Buy if…
- You push snow on flat commercial lots, parking decks, or loading docks with a defined push perimeter
- You don't have room or budget for a blower — pushers cost far less and maintain well
⛔ Skip if…
- Your site has no windrow drop zone — pushers pile snow that has to go somewhere
- Wet, heavy Ontario snow is your primary challenge — heavy packs reduce machine traction with a full pusher
🔍 Also consider…
- Sectional pusher if your site has frost heaves or uneven pavement you need the wings to follow
- Snow blower attachment if bank height from repeated pushes is becoming a problem
🔧 Machine Compatibility
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About Virnig in Canada
Virnig Manufacturing is a Minnesota-based producer known for consistent build quality and a wide model range. Their attachments ship to Canadian dealers regularly and are a common sight on Western and Prairie job sites.
Care & Maintenance
- Inspect the trip-edge blade for wear before each season and replace when worn below the wear indicator line — a worn-through trip-edge transfers full impact to the blade frame
- Grease all trip-edge pivot and hinge points after every major pushing session, especially after work in extreme cold where grease migrates out of joints faster
- Check side board welds for cracking after frost heave strikes — box sides bear significant impact forces during high-speed frost heave hits
- Rinse salt off after every use and before extended storage — road salt accelerates rust on unpainted steel edges and frame members faster than people expect
- Store off the ground on blocks or a pallet to prevent the cutting edge from sitting in standing water and rusting from below
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/snow-pushers/virnig-v60-snow-blower-60/
