Virnig V60 VBW84 84-Inch Skid Steer Snow Blower
🟡 High Flow
View on virnigmfg.com →
Overview
The Virnig V60 VBW84 is the widest model in Virnig's snow blower line at 84-inch cut width, suited for large-frame skid steers on wide walkways, parking garage ramps, and areas where snow blowing is more practical than stacking. The paddle auger design handles compacted and wet snow in a single efficient pass. Throws snow up to 40 feet. At 1,300 lbs, it needs a machine with at least 1,500 lb lift capacity. Ships to Canada through authorized Virnig dealers.
Canada Availability
Virnig attachments available through authorized North American dealers shipping to Canada.
Key Facts
- Model: VBW84
- Cut width: 88.7 inches
- Overall width: 91.2 inches
- Overall depth: 47.9 inches
- Auger type: paddle style, 18-inch diameter
- Throw distance: up to 40 feet
- Recommended flow: 14-25 GPM standard / 25-45 GPM high flow
- Weight: approx. 1,300 lbs
- Recommended loader capacity: greater than 1,500 lbs
Is This Right For You?
✅ Buy if…
- You push snow on flat commercial lots, parking decks, or loading docks with a defined push perimeter
- You don't have room or budget for a blower — pushers cost far less and maintain well
⛔ Skip if…
- Your site has no windrow drop zone — pushers pile snow that has to go somewhere
- Wet, heavy Ontario snow is your primary challenge — heavy packs reduce machine traction with a full pusher
🔍 Also consider…
- Sectional pusher if your site has frost heaves or uneven pavement you need the wings to follow
- Snow blower attachment if bank height from repeated pushes is becoming a problem
🔧 Machine Compatibility
Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.
About Virnig in Canada
Virnig Manufacturing is a Minnesota-based producer known for consistent build quality and a wide model range. Their attachments ship to Canadian dealers regularly and are a common sight on Western and Prairie job sites.
Care & Maintenance
- Inspect the trip-edge blade for wear before each season and replace when worn below the wear indicator line — a worn-through trip-edge transfers full impact to the blade frame
- Grease all trip-edge pivot and hinge points after every major pushing session, especially after work in extreme cold where grease migrates out of joints faster
- Check side board welds for cracking after frost heave strikes — box sides bear significant impact forces during high-speed frost heave hits
- Rinse salt off after every use and before extended storage — road salt accelerates rust on unpainted steel edges and frame members faster than people expect
- Store off the ground on blocks or a pallet to prevent the cutting edge from sitting in standing water and rusting from below
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/snow-pushers/virnig-v60-snow-blower-84/
