Virnig V60 9-Foot Snow Pusher for Skid Steers
View on virnig.com →
Overview
The 9-foot-foot snow pusher clears large paved areas — parking lots, loading docks, industrial yards — in fewer passes than a bucket or blade. Virnig Manufacturing (Minnesota) is well regarded in Canada for heavy-duty skid steer attachments, available through Canadian equipment dealers. The sectional containment design keeps snow moving in front of the blade without spillover. Compatible with most mid-frame and large-frame skid steers via SSQA. Available in Canada through Virnig's Canadian dealer network.
Canada Availability
Available in Canada through Virnig's Canadian dealer network.
Key Facts
- Working width: 9 feet
- Series: V60
- Trip edge: yes
- Application: commercial lots, farm yards
- Mount: universal SSQA
- Typical weight: 550–700 lbs
- Hydraulic flow: none required — passive attachment, no auxiliary hydraulics
Is This Right For You?
✅ Buy if…
- You push snow on flat commercial lots, parking decks, or loading docks with a defined push perimeter
- You don't have room or budget for a blower — pushers cost far less and maintain well
⛔ Skip if…
- Your site has no windrow drop zone — pushers pile snow that has to go somewhere
- Wet, heavy Ontario snow is your primary challenge — heavy packs reduce machine traction with a full pusher
🔍 Also consider…
- Sectional pusher if your site has frost heaves or uneven pavement you need the wings to follow
- Snow blower attachment if bank height from repeated pushes is becoming a problem
🔧 Machine Compatibility
Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.
About Virnig in Canada
Virnig Manufacturing is a Minnesota-based producer known for consistent build quality and a wide model range. Their attachments ship to Canadian dealers regularly and are a common sight on Western and Prairie job sites.
Care & Maintenance
- Inspect the trip-edge blade for wear before each season and replace when worn below the wear indicator line — a worn-through trip-edge transfers full impact to the blade frame
- Grease all trip-edge pivot and hinge points after every major pushing session, especially after work in extreme cold where grease migrates out of joints faster
- Check side board welds for cracking after frost heave strikes — box sides bear significant impact forces during high-speed frost heave hits
- Rinse salt off after every use and before extended storage — road salt accelerates rust on unpainted steel edges and frame members faster than people expect
- Store off the ground on blocks or a pallet to prevent the cutting edge from sitting in standing water and rusting from below
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/snow-pushers/virnig-v60-snow-pusher-9ft/
