Bobcat SC60 Skid Steer Soil Conditioner🔵 Mid
🟢 Standard Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
⚠ Too heavy for most small-frame machines
✓ Best on mid-frame or large-frame machines
View on bobcat.com →
Overview
Bobcat's SC60 soil conditioner is a 60-inch hydraulic drum attachment for Bobcat skid steers and CTLs used in landscaping and fine grading. It breaks up compacted soil and debris while leaving a level surface ready for seeding or sod. The Bob-Tach mount integrates seamlessly with Bobcat equipment. Available through Bobcat dealers across Canada, with dealer support for parts and service.
Canada Availability
Available through Bobcat dealers across Canada. Use the Bobcat dealer locator at bobcat.com/en-ca to find your nearest location.
Key Facts
- Model: SC60
- Working width: 60 inches
- Drive: hydraulic rotating drum
- Mount: Bob-Tach skid steer quick attach
- Compatible: Bobcat skid steers and CTLs
- Application: landscaping, seedbed preparation, fine grading
- Weight: 575–1825 lbs
- Hydraulic flow: 15–35 GPM
✅ Specs sourced from bobcat.com · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- You prep lawns, residential lots, or acreage for seeding — soil conditioners remove rocks and till in one pass
- Post-construction cleanup where you need to remove debris, rocks, and construction material from the surface
- Subdivision lot seeding prep is regular work — soil conditioners are the go-to attachment for that job
⛔ Skip if…
- Deep tillage and soil mixing is your goal — a rototiller or subsoiler works better for that
- Your ground is rocky or heavily compacted — you may need to scarify first before a soil conditioner works efficiently
🔍 Also consider…
- Power rake for lighter debris removal and final seedbed touch-up
- Rototiller for agricultural plots needing deep tillage and amendment incorporation
🔧 Machine Compatibility
Designed for Bobcat machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.
About Bobcat in Canada
Bobcat is one of the most recognized skid steer brands in Canada, with a dealer presence in every province. Their OEM attachments are engineered specifically for Bobcat machines but use universal SSQA mounts for cross-brand compatibility.
Care & Maintenance
- Inspect carbide rotor teeth after every use — chipped or worn teeth cut unevenly and increase hydraulic motor load significantly
- Replace teeth in matched pairs across the rotor to maintain balance — uneven tooth wear creates vibration that stresses motor bearings and the drive system
- Grease rotor shaft bearing housings after every 8 hours of operation
- Clean packed soil from behind the rotor guard and between tooth mounts after every use — buildup restricts rotation and can cause the rotor to stall in normal material
- Check the hydraulic motor drive coupler and belts (if belt-driven) for wear weekly during active season — belt failure in the middle of a job is a common and avoidable breakdown
How to Connect
- Attach frame using Bob-Tach
- Connect hydraulic couplers for rotor motor
- Lower rotor to working depth before engaging rotation
- Make first pass at half speed to verify depth and rock clearance
⚠ Safety NoteSoil conditioners require firm soil contact — avoid engaging on hard pan or rock. High-flow required on most models.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/soil-conditioners/bobcat-soil-conditioner-60/
