Bobcat Vibratory Plate Compactor for Skid Steers🔵 Mid
🟢 Standard Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
⚠ Too heavy for most small-frame machines
✓ Best on mid-frame or large-frame machines
View on bobcat.com →
Overview
Bobcat's vibratory plate compactor uses a hydraulically powered eccentric weight to compact soil, gravel, and sub-base material in trenches, utility cuts, and behind retaining walls. Much faster than hand-operated plate compactors — one skid steer covers a trench run in minutes. Used by utility contractors and landscapers across Canada. Available through authorized Bobcat dealers.
Canada Availability
Available through authorized Bobcat dealers across Canada.
Key Facts
- Type: vibratory plate compactor
- Drive: hydraulic
- Application: trench backfill, utility cuts, sub-base compaction
- Mount: Bobcat Bob-Tach
- Compatible: standard-flow Bobcat skid steers and CTLs
- Weight: 700–2200 lbs
- Hydraulic flow: 15–35 GPM
✅ Specs sourced from bobcat.com · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- You compact granular fill, gravel, or aggregate after grading — rollers and compactors eliminate voids
- Pathway construction, driveway base compaction, or trench backfill compaction with your skid steer
- You want to combine compaction with your existing skid steer fleet without a dedicated walk-behind compactor
⛔ Skip if…
- Cohesive clay soils are your primary material — vibratory compaction is less effective in clay
- Deep fill lifts over 12 inches — you'll need multiple passes or a heavier piece of equipment
🔍 Also consider…
- Soil conditioner for surface prep and grading before compaction
- Landplane for final grading before compaction
🔧 Machine Compatibility
Designed for Bobcat machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.
About Bobcat in Canada
Bobcat is one of the most recognized skid steer brands in Canada, with a dealer presence in every province. Their OEM attachments are engineered specifically for Bobcat machines but use universal SSQA mounts for cross-brand compatibility.
Care & Maintenance
- Inspect carbide rotor teeth after every use — chipped or worn teeth cut unevenly and increase hydraulic motor load significantly
- Replace teeth in matched pairs across the rotor to maintain balance — uneven tooth wear creates vibration that stresses motor bearings and the drive system
- Grease rotor shaft bearing housings after every 8 hours of operation
- Clean packed soil from behind the rotor guard and between tooth mounts after every use — buildup restricts rotation and can cause the rotor to stall in normal material
- Check the hydraulic motor drive coupler and belts (if belt-driven) for wear weekly during active season — belt failure in the middle of a job is a common and avoidable breakdown
How to Connect
- Attach frame using Bob-Tach
- Connect hydraulic couplers for rotor motor
- Lower rotor to working depth before engaging rotation
- Make first pass at half speed to verify depth and rock clearance
⚠ Safety NoteSoil conditioners require firm soil contact — avoid engaging on hard pan or rock. High-flow required on most models.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/soil-conditioners/bobcat-vibratory-plate-compactor/
