IronBull 96-Inch Soil Conditioner for Large Skid Steers💚 Budget
🟢 Standard Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
✗ Too heavy for small & mid-frame machines
✓ Requires large-frame or XL machine
View on ironbullinc.com →
Overview
The 96-inch-inch soil conditioner pulverizes compacted earth and breaks down clods to create a fine seedbed or graded surface on Canadian landscaping projects. IronBull attachments are available through Canadian equipment dealers and distributors. Counter-rotating tines pull rocks and debris to the surface where they can be removed. An essential tool before seeding lawns, athletic fields, or boulevard strips. Available in Canada through IronBull dealers and online with Canadian shipping.
Canada Availability
Available in Canada through IronBull dealers and online with Canadian shipping.
Key Facts
- Working width: 96 inches
- Type: hydraulic soil conditioner
- Application: large commercial landscaping, seedbed prep
- Mount: universal SSQA
- Weight: 925–2925 lbs
- Hydraulic flow: 15–35 GPM
Is This Right For You?
✅ Buy if…
- You prep lawns, residential lots, or acreage for seeding — soil conditioners remove rocks and till in one pass
- Post-construction cleanup where you need to remove debris, rocks, and construction material from the surface
- Subdivision lot seeding prep is regular work — soil conditioners are the go-to attachment for that job
⛔ Skip if…
- Deep tillage and soil mixing is your goal — a rototiller or subsoiler works better for that
- Your ground is rocky or heavily compacted — you may need to scarify first before a soil conditioner works efficiently
🔍 Also consider…
- Power rake for lighter debris removal and final seedbed touch-up
- Rototiller for agricultural plots needing deep tillage and amendment incorporation
🔧 Machine Compatibility
Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Best suited to large-frame machines (S750+ class or equivalent CTL).
About IronBull in Canada
IronBull attachments are distributed across Canada through online and dealer channels, offering competitive pricing on workhorse models suited to farm, construction, and municipal use.
Care & Maintenance
- Inspect carbide rotor teeth after every use — chipped or worn teeth cut unevenly and increase hydraulic motor load significantly
- Replace teeth in matched pairs across the rotor to maintain balance — uneven tooth wear creates vibration that stresses motor bearings and the drive system
- Grease rotor shaft bearing housings after every 8 hours of operation
- Clean packed soil from behind the rotor guard and between tooth mounts after every use — buildup restricts rotation and can cause the rotor to stall in normal material
- Check the hydraulic motor drive coupler and belts (if belt-driven) for wear weekly during active season — belt failure in the middle of a job is a common and avoidable breakdown
How to Connect
- Attach frame using Bob-Tach
- Connect hydraulic couplers for rotor motor
- Lower rotor to working depth before engaging rotation
- Make first pass at half speed to verify depth and rock clearance
⚠ Safety NoteSoil conditioners require firm soil contact — avoid engaging on hard pan or rock. High-flow required on most models.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/soil-conditioners/ironbull-soil-conditioner-96/
