TMG-MSS10 Skid Steer Material Spreader 10 Cu-Ft💚 Budget
🟢 Standard Flow
✓ Runs on standard auxiliary flow
View on tmgindustrial.ca →
Overview
The TMG-MSS10 Tilt-N-Scoop material spreader attaches to a skid steer and spreads salt, sand, feed, fertilizer, or other granular materials up to 30 feet wide. The 10 cubic foot hopper holds a useful load for covering long runs without frequent refills. The tilt-and-scoop design lets the operator load material directly by scooping it from a pile with the attachment itself — no additional equipment needed for loading. Hydraulic spinner drive runs off standard skid steer auxiliary flow. Available direct from TMG Industrial Canada.
Canada Availability
Available direct from TMG Industrial Canada (tmgindustrial.ca) with Canadian shipping and free pickup at select locations.
Key Facts
- Model: TMG-MSS10
- Hopper capacity: 10 cubic feet
- Spread range: up to 30 feet wide
- Hydraulic flow: 6.5-12 GPM
- Loading: tilt-and-scoop self-loading design
- Sidewalk skirt: included
- Application: salt, sand, fertilizer, feed, granular materials
- Mount: universal SSQA skid steer quick attach
Is This Right For You?
✅ Buy if…
- You spread sand, salt, seed, or granular material over large areas without manual labor
- Municipal or commercial winter maintenance where you need both salt spreading and snow pushing capability
- Seeding large acreage or sports fields where a broadcast spreader on a skid steer covers ground fast
⛔ Skip if…
- Precise banding or row application is needed — broadcast spreaders aren't accurate enough for that
- Your spreader load is small — a walk-behind spreader is sufficient for small areas
🔍 Also consider…
- Salt spreader attachment if your primary use is winter road/lot maintenance
- Soil conditioner for seedbed prep before spreading seed
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid-frame machines (S450–S650 class) are the most common fit.
About TMG Industrial in Canada
TMG Industrial imports and distributes a broad range of construction attachments from its Canadian warehouses, offering competitive pricing with delivery across Canada. A popular choice for contractors who want solid value without long lead times.
Care & Maintenance
- Inspect carbide rotor teeth after every use — chipped or worn teeth cut unevenly and increase hydraulic motor load significantly
- Replace teeth in matched pairs across the rotor to maintain balance — uneven tooth wear creates vibration that stresses motor bearings and the drive system
- Grease rotor shaft bearing housings after every 8 hours of operation
- Clean packed soil from behind the rotor guard and between tooth mounts after every use — buildup restricts rotation and can cause the rotor to stall in normal material
- Check the hydraulic motor drive coupler and belts (if belt-driven) for wear weekly during active season — belt failure in the middle of a job is a common and avoidable breakdown
How to Connect
- Attach frame using Bob-Tach
- Connect hydraulic couplers for rotor motor
- Lower rotor to working depth before engaging rotation
- Make first pass at half speed to verify depth and rock clearance
⚠ Safety NoteSoil conditioners require firm soil contact — avoid engaging on hard pan or rock. High-flow required on most models.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/soil-conditioners/tmg-mss10-material-spreader/
