TMG-SC90 90-Inch Soil Conditioner for Skid SteersBudget
🟢 Standard Flow
View on tmgindustrial.ca →
Overview
The TMG-SC90 is a 90-inch hydraulic soil conditioner for large-frame skid steers covering more ground per pass on big seeding and landscaping jobs. The hydraulic rotor with replaceable carbide teeth breaks up compacted soil into a fine, workable seedbed. Adjustable depth skid shoes. Requires higher hydraulic flow — verify with your skid steer specs. Universal SSQA mount. Sold direct from TMG Industrial Canada.
Canada Availability
Available direct from TMG Industrial Canada (tmgindustrial.ca).
Key Facts
- Working width: 90 inches
- Type: hydraulic soil conditioner
- Application: seedbed prep, landscaping
- Mount: universal SSQA
- Weight: 875–2750 lbs
- Hydraulic flow: 15–35 GPM
Is This Right For You?
✅ Buy if…
- You prep lawns, residential lots, or acreage for seeding — soil conditioners remove rocks and till in one pass
- Post-construction cleanup where you need to remove debris, rocks, and construction material from the surface
- Subdivision lot seeding prep is regular work — soil conditioners are the go-to attachment for that job
⛔ Skip if…
- Deep tillage and soil mixing is your goal — a rototiller or subsoiler works better for that
- Your ground is rocky or heavily compacted — you may need to scarify first before a soil conditioner works efficiently
🔍 Also consider…
- Power rake for lighter debris removal and final seedbed touch-up
- Rototiller for agricultural plots needing deep tillage and amendment incorporation
🔧 Machine Compatibility
Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Best suited to large-frame machines (S750+ class or equivalent CTL).
About TMG Industrial in Canada
TMG Industrial imports and distributes a broad range of construction attachments from its Canadian warehouses, offering competitive pricing with delivery across Canada. A popular choice for contractors who want solid value without long lead times.
Care & Maintenance
- Inspect carbide rotor teeth after every use — chipped or worn teeth cut unevenly and increase hydraulic motor load significantly
- Replace teeth in matched pairs across the rotor to maintain balance — uneven tooth wear creates vibration that stresses motor bearings and the drive system
- Grease rotor shaft bearing housings after every 8 hours of operation
- Clean packed soil from behind the rotor guard and between tooth mounts after every use — buildup restricts rotation and can cause the rotor to stall in normal material
- Check the hydraulic motor drive coupler and belts (if belt-driven) for wear weekly during active season — belt failure in the middle of a job is a common and avoidable breakdown
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/soil-conditioners/tmg-soil-conditioner-90/
