Virnig V60 96-Inch Soil Conditioner for Skid Steers🔵 Mid
🟢 Standard Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
✗ Too heavy for small & mid-frame machines
✓ Requires large-frame or XL machine
View on virnig.com →
Overview
The Virnig V60 96-inch soil conditioner handles large-scale seedbed preparation, sports field restoration, and high-production landscaping. The hydraulic drum covers maximum ground per pass, breaking up clods, grading, and removing debris simultaneously. Requires standard hydraulic flow (15–25 GPM) with a loader capacity over 1,500 lbs. Suited to large-frame skid steers on open acreage and commercial sites. Optional hydraulic angle moves graded material to one side. Compatible with most brands via SSQA. Made in Minnesota and available in Canada through Virnig's dealer network.
Canada Availability
Available in Canada through Virnig's Canadian dealer network.
Key Facts
- Working width: 96 inches
- Type: hydraulic soil conditioner
- Application: seedbed prep, landscaping
- Mount: universal SSQA
- Weight: 925–2925 lbs
- Hydraulic flow: 15–35 GPM
✅ Specs sourced from virnig.com · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- You prep lawns, residential lots, or acreage for seeding — soil conditioners remove rocks and till in one pass
- Post-construction cleanup where you need to remove debris, rocks, and construction material from the surface
- Subdivision lot seeding prep is regular work — soil conditioners are the go-to attachment for that job
⛔ Skip if…
- Deep tillage and soil mixing is your goal — a rototiller or subsoiler works better for that
- Your ground is rocky or heavily compacted — you may need to scarify first before a soil conditioner works efficiently
🔍 Also consider…
- Power rake for lighter debris removal and final seedbed touch-up
- Rototiller for agricultural plots needing deep tillage and amendment incorporation
🔧 Machine Compatibility
Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Best suited to large-frame machines (S750+ class or equivalent CTL).
About Virnig in Canada
Virnig Manufacturing is a Minnesota-based producer known for consistent build quality and a wide model range. Their attachments ship to Canadian dealers regularly and are a common sight on Western and Prairie job sites.
Care & Maintenance
- Inspect carbide rotor teeth after every use — chipped or worn teeth cut unevenly and increase hydraulic motor load significantly
- Replace teeth in matched pairs across the rotor to maintain balance — uneven tooth wear creates vibration that stresses motor bearings and the drive system
- Grease rotor shaft bearing housings after every 8 hours of operation
- Clean packed soil from behind the rotor guard and between tooth mounts after every use — buildup restricts rotation and can cause the rotor to stall in normal material
- Check the hydraulic motor drive coupler and belts (if belt-driven) for wear weekly during active season — belt failure in the middle of a job is a common and avoidable breakdown
How to Connect
- Attach frame using Bob-Tach
- Connect hydraulic couplers for rotor motor
- Lower rotor to working depth before engaging rotation
- Make first pass at half speed to verify depth and rock clearance
⚠ Safety NoteSoil conditioners require firm soil contact — avoid engaging on hard pan or rock. High-flow required on most models.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/soil-conditioners/virnig-v60-soil-conditioner-96-v/
