Baumalight SG560 Stump Grinder for Large Skid Steers
🟡 High Flow
View on baumalight.com →
Overview
The Baumalight SG560 Stump Grinder for Large Skid Steers grinds stumps below grade on Canadian acreages, yards, and construction sites, eliminating regrowth and tripping hazards. Baumalight is a Canadian manufacturer based in Ontario, offering mulchers, brush cutters, and forestry attachments with domestic support and parts. Carbide teeth on a spinning wheel cut through hardwood stumps; teeth are individually replaceable. High-flow hydraulics are typically required. Available in Canada through Baumalight dealers. Canadian-manufactured — Alberta.
Canada Availability
Available in Canada through Baumalight dealers. Canadian-manufactured — Alberta.
Key Facts
- Model: SG560
- Type: high-flow stump grinder with hydraulic side-shift
- Drive: high-flow hydraulic
- Application: large stumps, municipal, high-production
- Mount: universal SSQA
- Manufacturer: Canadian
- Weight: 800–2500 lbs
- Hydraulic flow: 18–35 GPM
Is This Right For You?
✅ Buy if…
- You remove tree stumps on residential or commercial properties where a dedicated stump grinder trailer isn't cost-effective
- Landscaping, tree service, or property clearing contracts where stump removal is part of the job
- You already run a skid steer and want to add stump grinding without a second piece of dedicated equipment
⛔ Skip if…
- Large hardwood stumps over 18 inches are your primary target — a heavy-duty grinder works more efficiently
- Stumps are tight against structures regularly — a side-shift model gives you access a standard unit can't
🔍 Also consider…
- Heavy-duty stump grinder for large-diameter hardwood stumps
- Side-shift stump grinder for tight obstacle-constrained work sites
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid-frame machines (S450–S650 class) are the most common fit.
About Baumalight in Canada
Baumalight is a Canadian manufacturer based in Ontario, producing forestry and land clearing attachments for Canadian conditions. Buying Baumalight means buying Canadian — local warranty support, parts, and engineering.
Care & Maintenance
- Check carbide tooth torque before every use — loose teeth eject at high RPM and can cause catastrophic cutterhead damage or injury
- Replace carbide teeth in matching pairs (left-right balance) to maintain cutterhead balance and reduce destructive vibration
- Grease cutterhead drive spindle bearings after every 4 hours of operation — grinding generates significant heat and vibration that accelerates lubricant breakdown
- Clean wood chips and soil from the motor ventilation shroud and belt drive area after every use — blocked ventilation causes motor overheating
- Inspect hydraulic motor fittings for loosening after hard-material sessions — the constant vibration of grinding loosens threaded fittings progressively
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/stump-grinders/baumalight-sg560-stump-grinder/