HLA Skid Steer Stump Grinder🔵 Mid
🟡 High Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
⚠ Too heavy for most small-frame machines
✓ Best on mid-frame or large-frame machines
View on hlaattachments.com →
Overview
HLA Attachments manufactures a skid steer stump grinder at their Ontario facility, designed for Canadian buyers who want domestically made equipment with nearby dealer support. The hydraulic cutterhead handles stump removal on acreages, farm yards, and tree service jobs. HLA products are widely distributed across Western Canada through dealers including GLC Equipment. A reliable buy-Canadian option for stump grinding work.
Canada Availability
HLA Attachments are manufactured in Ontario, Canada. Available through GLC Equipment and HLA's dealer network across Western Canada.
Key Facts
- Brand: HLA Attachments
- Type: hydraulic skid steer stump grinder
- Drive: high-flow hydraulic
- Application: stump removal, acreage cleanup, tree service
- Canadian-manufactured
- SSQA skid steer quick attach
- Weight: 800–2500 lbs
- Hydraulic flow: 18–35 GPM
Is This Right For You?
✅ Buy if…
- You remove tree stumps on residential or commercial properties where a dedicated stump grinder trailer isn't cost-effective
- Landscaping, tree service, or property clearing contracts where stump removal is part of the job
- You already run a skid steer and want to add stump grinding without a second piece of dedicated equipment
⛔ Skip if…
- Large hardwood stumps over 18 inches are your primary target — a heavy-duty grinder works more efficiently
- Stumps are tight against structures regularly — a side-shift model gives you access a standard unit can't
🔍 Also consider…
- Heavy-duty stump grinder for large-diameter hardwood stumps
- Side-shift stump grinder for tight obstacle-constrained work sites
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid-frame machines (S450–S650 class) are the most common fit.
About HLA in Canada
HLA Attachments is an Ontario-based manufacturer that designs and builds attachments in Waterloo, ON, with a dealer network spanning all provinces. Backed by a Canadian warranty and local parts availability, HLA is one of the most trusted names on Canadian job sites.
Care & Maintenance
- Check carbide tooth torque before every use — loose teeth eject at high RPM and can cause catastrophic cutterhead damage or injury
- Replace carbide teeth in matching pairs (left-right balance) to maintain cutterhead balance and reduce destructive vibration
- Grease cutterhead drive spindle bearings after every 4 hours of operation — grinding generates significant heat and vibration that accelerates lubricant breakdown
- Clean wood chips and soil from the motor ventilation shroud and belt drive area after every use — blocked ventilation causes motor overheating
- Inspect hydraulic motor fittings for loosening after hard-material sessions — the constant vibration of grinding loosens threaded fittings progressively
How to Connect
- Attach stump grinder using Bob-Tach
- Connect high-flow hydraulic couplers
- Run wheel at idle to verify direction (wheel should spin into stump, not away)
- Clear 10m radius of bystanders before grinding
⚠ Safety NoteHigh-flow required (20-40 GPM). Always wear face shield and hearing protection.
🪵 Before You Buy a Stump Grinder
Virtually all skid steer stump grinders require high-flow hydraulics — and carbide tooth condition is a major operating cost factor.
- Confirm your machine delivers 15–35 GPM high-flow Check your flow spec →
- Match cutterhead width to your typical stump diameter range
- Factor in carbide tooth replacement cost — budget $300–800/season for regular use
Find a Stump Grinder Dealer →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/stump-grinders/hla-stump-grinder/
Ready to Buy? Check These First
⚙️
Confirm Machine Fit
Verify your machine's hydraulic flow meets this attachment's requirements before ordering. High-flow attachments need 25–45+ GPM — standard flow machines won't run them properly.
Check your machine's flow →
🇨🇦
Find a Canadian Dealer
Buy through a Canadian dealer for warranty support, parts, and service. Avoid grey-market imports on high-ticket attachments.
Find dealers by province →
