John Deere Worksite Pro Skid Steer TrencherPremium
🟢 Standard Flow
View on brandt.ca →
Overview
John Deere's Worksite Pro skid steer trencher is available in multiple boom depths and chain widths for utility, irrigation, and drainage work. Available in Canada through Brandt and John Deere dealers nationally. A factory-matched attachment for John Deere skid steers with dealer support coast to coast in Canada for parts and service.
Canada Availability
Available in Canada through Brandt / John Deere Worksite Pro dealer network.
Key Facts
- Type: chain trencher
- Multiple boom depth options
- Multiple chain width options
- Application: utility lines, irrigation, drainage, fence lines
- Compatible: John Deere skid steers and CTLs
- Weight: 700–2000 lbs
- Hydraulic flow: 15–30 GPM
Is This Right For You?
✅ Buy if…
- You trench through soft to moderate soil for utilities, drainage, or irrigation lines at 36–60 inch depth
- Your soil is clay, loam, sandy loam, or river bottom — chain trenchers cut fast in these conditions
⛔ Skip if…
- Your soil is solid rock, dense caliche, or Shield granite — chain links and sprockets wear out fast in rock
- You trench in deeply frozen Prairie ground regularly — rock chain at 3–5× wear rate makes winter trenching expensive
🔍 Also consider…
- Rock wheel trencher if your ground is consistently rocky or hardpan
- Standard auger if you're drilling individual holes rather than continuous trench lines
🔧 Machine Compatibility
Designed for John Deere machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.
About John Deere in Canada
John Deere attachments are available through an extensive Canadian dealer network, ensuring local service, parts availability, and warranty support coast to coast. Designed to pair with JD machines but compatible with any skid steer via universal quick attach.
Care & Maintenance
- Inspect chain teeth after every use — worn teeth slow penetration dramatically and increase drive motor load; a full day's work can dull a chain in abrasive soil
- Lubricate the drive chain and boom sprockets before each use and again after every 4 hours of continuous trenching
- Check the boom bar for cracking or deformation after work in rocky or abrasive conditions — boom cracks propagate quickly under the bending loads of trenching
- Clean soil from the drive motor cooling fins and chain case after summer use — compacted soil on the motor causes overheating on long cuts
- Store the chain with teeth protected from ground contact — resting a chain on carbide tips on concrete chips the teeth before you've even used it
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/trenchers/john-deere-ta-trencher/
