John Deere Worksite Pro TR36B TrencherPremium
🟢 Standard Flow
View on brandt.ca →
Overview
The TR36B is a chain trencher in John Deere's Worksite Pro B-Series line, capable of cutting to 36 inches deep. A heavy-duty axle and wheel motor design replaces the older drive system for improved durability. The replaceable spoil auger moves most excavated material to one side of the trench — important on tight sites where cleanup matters. Built-in skid shoe and depth indicators help operators maintain consistent trench grade without constant stopping. Optional chain styles and widths let you match the setup to your material — including standard earth chain for typical Canadian soil, or harder-wear options for rocky ground. Available in Canada through Brandt.
Canada Availability
Available in Canada through Brandt / John Deere Worksite Pro — dealer locations in BC, AB, SK, MB, and ON.
Key Facts
- Maximum trench depth: 36 inches
- Application: utility runs, drainage, irrigation, fence lines
- Drive: axle and wheel motor design (heavy-duty planetary)
- Spoil auger: replaceable, mounds spoil to one side
- Chain options: standard earth, harder-wear (consult dealer for soil match)
- Spring-loaded boom reduces shock to machine
- Built-in skid shoe and depth indicators for consistent grading
- SSQA (universal quick attach) mount
- Requires continuous-flow auxiliary hydraulics
Is This Right For You?
✅ Buy if…
- You trench through soft to moderate soil for utilities, drainage, or irrigation lines at 36–60 inch depth
- Your soil is clay, loam, sandy loam, or river bottom — chain trenchers cut fast in these conditions
⛔ Skip if…
- Your soil is solid rock, dense caliche, or Shield granite — chain links and sprockets wear out fast in rock
- You trench in deeply frozen Prairie ground regularly — rock chain at 3–5× wear rate makes winter trenching expensive
🔍 Also consider…
- Rock wheel trencher if your ground is consistently rocky or hardpan
- Standard auger if you're drilling individual holes rather than continuous trench lines
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid-frame machines (S450–S650 class) are the most common fit.
About John Deere in Canada
John Deere attachments are available through an extensive Canadian dealer network, ensuring local service, parts availability, and warranty support coast to coast. Designed to pair with JD machines but compatible with any skid steer via universal quick attach.
Care & Maintenance
- Inspect chain teeth after every use — worn teeth slow penetration dramatically and increase drive motor load; a full day's work can dull a chain in abrasive soil
- Lubricate the drive chain and boom sprockets before each use and again after every 4 hours of continuous trenching
- Check the boom bar for cracking or deformation after work in rocky or abrasive conditions — boom cracks propagate quickly under the bending loads of trenching
- Clean soil from the drive motor cooling fins and chain case after summer use — compacted soil on the motor causes overheating on long cuts
- Store the chain with teeth protected from ground contact — resting a chain on carbide tips on concrete chips the teeth before you've even used it
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/trenchers/john-deere-tr36b-trencher/
