McMillen X1675 High-Flow Skid Steer Auger Drive🔵 Mid
🟡 High Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
✓ Fits most skid steers, including small-frame
View on paladinattachments.com →
Overview
McMillen's X1675 is a high-flow auger drive for larger skid steers needing more torque for large-diameter bits or challenging soil. Available through Paladin/McMillen dealers in Canada. A step up from the X1475 for machines with high-flow hydraulics and jobs requiring bits larger than 24 inches or work in harder soils like clay or frozen ground.
Canada Availability
Available through Langner Equipment and other Paladin/McMillen dealers in Canada.
Key Facts
- Model: X1675
- Type: high-flow skid steer auger drive
- Drive: high-flow hydraulic
- Higher torque than X1475
- Compatible with large-diameter bits
- Application: large posts, tree planting, hard soils
- SSQA universal quick attach
- Typical bit weight: 35–60 lbs
Is This Right For You?
✅ Buy if…
- You drill post holes, footings, or tree holes regularly enough that buying beats renting
- Your skid steer's hydraulic output is matched to the drive unit — verify GPM range before buying
⛔ Skip if…
- You only drill occasionally — renting an auger package for $250–$400/day often wins over ownership at $3,000–$8,000 investment
- Your machine's GPM is outside the drive unit's rated range — running outside spec damages the motor
🔍 Also consider…
- A rental package first to confirm the right drive unit spec for your soil and machine
- Auger bits in multiple diameters — the drive unit investment only makes sense if you have the right bits to go with it
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid-frame machines (S450–S650 class) are the most common fit.
About McMillen in Canada
McMillen is a US-based manufacturer of auger drives and bits with a long track record in North American construction and agricultural markets. Their heavy-duty auger systems are available through equipment dealers across Canada and are built to handle demanding soil and rock conditions.
Care & Maintenance
- Grease the drive unit gearbox per the manufacturer's schedule — typically every 8 hours of operation; a starved gearbox is the most common cause of drive unit failure
- Inspect bit carbide teeth after every use in rocky or abrasive soil — worn or chipped teeth increase drive unit load and reduce penetration
- Replace a worn pilot bit before the main teeth wear — the pilot centers the bit and prevents wobble that stresses the drive unit gearbox
- Check hydraulic hose connections at the drive unit before each use — hose chafing in tight soil is a common failure point
- Store bits vertically or with exposed carbide protected — storing lying flat with unprotected carbide causes chipping from incidental contact
How to Connect
- Attach auger drive head using Bob-Tach
- Connect high-flow hydraulic couplers (colour-coded on most brands)
- Verify rotation direction — auger should rotate clockwise when viewed from above
- Lower auger to ground and test rotation at idle before digging
⚠ Safety NoteAugers typically require 15-35 GPM — verify your machine's aux hydraulic flow before connecting
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/augers/mcmillen-x1675-high-flow-auger/
