Baumalight Roughneck RC582 Planetary Auger Drive⭐ Premium
🟢 Standard Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
✓ Fits most skid steers, including small-frame
View on tagequipment.ca →
Overview
The RC582 is Baumalight's mid-range planetary auger drive — a step up from the gear-driven RC442 in torque and versatility. It handles 6–24 GPM, which covers standard and light high-flow machines. The planetary drive system delivers stronger, more consistent torque than gear-drives in tougher soils — useful in Canadian prairie clay and glacial till that slow down lighter augers. At 245 lbs it's compact for a planetary unit. Available with either a 2-inch hex or 2 9/16-inch round output shaft depending on your bit selection. Stocked and sold in Canada through Tag Equipment.
Canada Availability
Available in Canada through Tag Equipment (Ontario-based, ships across Canada).
Key Facts
- Drive type: planetary
- Hydraulic flow: 6–24 GPM (max 25 GPM)
- Hydraulic pressure: 1,500–3,000 PSI (max 3,300 PSI)
- Output shaft: 2-inch hex or 2 9/16-inch round (option)
- Gear ratio: 3.6:1
- Weight: 245 lbs (without auger bit)
- Application: post holes, fencing, landscaping, utility work in varied soil conditions
- Compatible with most skid steers via universal mount
Is This Right For You?
✅ Buy if…
- You drill post holes, footings, or tree holes regularly enough that buying beats renting
- Your skid steer's hydraulic output is matched to the drive unit — verify GPM range before buying
⛔ Skip if…
- You only drill occasionally — renting an auger package for $250–$400/day often wins over ownership at $3,000–$8,000 investment
- Your machine's GPM is outside the drive unit's rated range — running outside spec damages the motor
🔍 Also consider…
- A rental package first to confirm the right drive unit spec for your soil and machine
- Auger bits in multiple diameters — the drive unit investment only makes sense if you have the right bits to go with it
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid-frame machines (S450–S650 class) are the most common fit.
About Baumalight in Canada
Baumalight is a Canadian manufacturer based in Ontario, producing forestry and land clearing attachments for Canadian conditions. Buying Baumalight means buying Canadian — local warranty support, parts, and engineering.
Care & Maintenance
- Grease the drive unit gearbox per the manufacturer's schedule — typically every 8 hours of operation; a starved gearbox is the most common cause of drive unit failure
- Inspect bit carbide teeth after every use in rocky or abrasive soil — worn or chipped teeth increase drive unit load and reduce penetration
- Replace a worn pilot bit before the main teeth wear — the pilot centers the bit and prevents wobble that stresses the drive unit gearbox
- Check hydraulic hose connections at the drive unit before each use — hose chafing in tight soil is a common failure point
- Store bits vertically or with exposed carbide protected — storing lying flat with unprotected carbide causes chipping from incidental contact
How to Connect
- Attach auger drive head using Bob-Tach
- Connect high-flow hydraulic couplers (colour-coded on most brands)
- Verify rotation direction — auger should rotate clockwise when viewed from above
- Lower auger to ground and test rotation at idle before digging
⚠ Safety NoteAugers typically require 15-35 GPM — verify your machine's aux hydraulic flow before connecting
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/augers/tag-baumalight-rc582-auger/
