Bobcat 72-Inch Angle Broom for Skid Steers🔵 Mid
🟢 Standard Flow
✓ Runs on standard auxiliary flow
View on bobcat.com →
Overview
The Bobcat 72-inch Angle Broom is an OEM hydraulic broom for Bobcat skid steers, sweeping debris, spring road sand, and construction site material to either side. Hydraulic angle adjustment lets the operator reposition the broom sweep direction without dismounting. As an OEM Bobcat attachment, it integrates cleanly with the machine's auxiliary hydraulics. Available through Bobcat Canada's dealer network across the country.
Canada Availability
Available in Canada through Bobcat Canada's national dealer network.
Key Facts
- Working width: 72 inches
- Broom type: hydraulic angle broom
- Hydraulic angle: adjustable left and right
- Application: road sand, construction site debris, commercial lot sweeping
- OEM Bobcat attachment — integrates with Bobcat auxiliary hydraulics
- Bobcat quick attach mount
✅ Specs sourced from bobcat.com · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- You clean up debris, sand, and small material from hard surfaces like concrete, asphalt, or warehouse floors
- Spring road sand cleanup in Canadian parking lots is a core task for your machine
⛔ Skip if…
- You need to collect the material, not just move it — an angle broom side-casts debris into a windrow
- Fine dust or regulated material (silica) requires containment — an angle broom disperses it
🔍 Also consider…
- Pickup broom if you need to collect material rather than side-cast it
- Street sweeper or vacuum attachment if dust control is a regulatory requirement
🔧 Machine Compatibility
Designed for Bobcat machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.
About Bobcat in Canada
Bobcat is one of the most recognized skid steer brands in Canada, with a dealer presence in every province. Their OEM attachments are engineered specifically for Bobcat machines but use universal SSQA mounts for cross-brand compatibility.
Care & Maintenance
- Inspect broom fill length after every 20 hours of use — bristles below minimum length drag rather than sweep, waste time, and mask the fact that you need a replacement
- Clean debris wrapped in the drum core after every extended session — wire, hair, and root cause drum imbalance and stress the hydraulic motor bearings
- Grease drum bearing end caps monthly during active use periods
- Check hydraulic motor connections and angle cylinder fittings weekly — broom motors work hard and connection fittings loosen over time
- Store on end or off the ground so bristle fill doesn't take a permanent set under drum weight — brooms stored drum-down develop flat spots in the fill that affect sweep quality
How to Connect
- Attach broom frame using Bob-Tach
- Connect hydraulic couplers for rotation motor
- Verify rotation direction (forward-sweep or reverse-sweep per job)
- Adjust broom angle if applicable — most have manual tilt adjust
⚠ Safety NoteBrooms are typically standard-flow (10-18 GPM). Angle brooms can swivel — set angle before engaging rotation.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/brooms/bobcat-angle-broom-72/
.jpg)
