HLA HS100 ScatterShot Skid Steer Sand Spreader🔵 Mid
🟢 Standard Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
✓ Fits most skid steers, including small-frame
View on hlaattachments.com →
Overview
HLA's HS100 ScatterShot is a skid steer sand and salt spreader with 0.5 cubic yard (approximately 1/2 yard) capacity, designed for dispersing sand, gravel, or salt on icy surfaces. Ontario-manufactured by Horst Welding in Listowel, Ontario, and stocked through HLA dealers and Langner Equipment in Canada. Currently priced at approximately $6,250 CAD through Canadian dealers.
Canada Availability
Ontario-manufactured by Horst Welding. Available through HLA dealers and Langner Equipment in Canada at approximately $6,250 CAD.
Key Facts
- Model: HLA HS100 ScatterShot
- Capacity: 0.5 cubic yard
- Type: skid steer material spreader
- Application: salt, sand, gravel spreading on icy surfaces
- Ontario-manufactured by Horst Welding (Listowel, ON)
- SSQA skid steer quick attach
- Weight: 300–900 lbs
- Hydraulic flow: 15–25 GPM
Is This Right For You?
✅ Buy if…
- You apply sand or salt to icy or snowy surfaces as part of a snow removal contract
- You want a single attachment that works on a skid steer you already own
⛔ Skip if…
- You cover large distances — a dedicated spreader truck covers ground faster
- You spread liquid de-icer — these are dry material spreaders only
🔍 Also consider…
- Snow pusher if your primary task is pushing, not spreading
- A tow-behind spreader if a skid steer isn't your primary vehicle for this task
🔧 Machine Compatibility
Compact size fits small-frame machines (S70–S185 class) as well as mid and large-frame loaders. Universal SSQA mount works with all major brands.
About HLA in Canada
HLA Attachments is an Ontario-based manufacturer that designs and builds attachments in Waterloo, ON, with a dealer network spanning all provinces. Backed by a Canadian warranty and local parts availability, HLA is one of the most trusted names on Canadian job sites.
Care & Maintenance
- Inspect broom fill length after every 20 hours of use — bristles below minimum length drag rather than sweep, waste time, and mask the fact that you need a replacement
- Clean debris wrapped in the drum core after every extended session — wire, hair, and root cause drum imbalance and stress the hydraulic motor bearings
- Grease drum bearing end caps monthly during active use periods
- Check hydraulic motor connections and angle cylinder fittings weekly — broom motors work hard and connection fittings loosen over time
- Store on end or off the ground so bristle fill doesn't take a permanent set under drum weight — brooms stored drum-down develop flat spots in the fill that affect sweep quality
How to Connect
- Attach broom frame using Bob-Tach
- Connect hydraulic couplers for rotation motor
- Verify rotation direction (forward-sweep or reverse-sweep per job)
- Adjust broom angle if applicable — most have manual tilt adjust
⚠ Safety NoteBrooms are typically standard-flow (10-18 GPM). Angle brooms can swivel — set angle before engaging rotation.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/brooms/hla-hs100-skid-steer-sander/
