John Deere Worksite Pro BA60 Angle Broom🔵 Mid
🟢 Standard Flow
✓ Runs on standard auxiliary flow
View on brandt.ca →
Overview
The BA60 is the 60-inch angle broom in John Deere's Worksite Pro line — the most compact option in the angle broom series, suited to smaller skid steers and tighter job sites where a full-width broom won't fit. Like the larger BA72 and BA84, it sweeps debris and loose material to the side rather than collecting it in a hopper, making it fast and simple to use. Hydraulic angle adjustment lets the operator direct material to either side without repositioning the machine. Common use in Canadian construction and municipal work: sweeping debris off driveways, shop floors, construction pads, and parking areas. Standard-flow hydraulics.
Canada Availability
Available in Canada through Brandt / John Deere Worksite Pro dealers.
Key Facts
- Sweeping width: 60 inches
- Type: angle broom — sweeps debris to the side
- Hydraulic angle adjustment: directs material left or right
- Hydraulic flow: standard flow
- Application: construction pads, driveways, shop floors, parking areas
- Suited to smaller and mid-size skid steers
- SSQA (universal quick attach) mount
✅ Specs sourced from brandt.ca · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- You clean up debris, sand, and small material from hard surfaces like concrete, asphalt, or warehouse floors
- Spring road sand cleanup in Canadian parking lots is a core task for your machine
⛔ Skip if…
- You need to collect the material, not just move it — an angle broom side-casts debris into a windrow
- Fine dust or regulated material (silica) requires containment — an angle broom disperses it
🔍 Also consider…
- Pickup broom if you need to collect material rather than side-cast it
- Street sweeper or vacuum attachment if dust control is a regulatory requirement
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid to large-frame machines (S450–S750 class) are the best fit for this width.
About John Deere in Canada
John Deere attachments are available through an extensive Canadian dealer network, ensuring local service, parts availability, and warranty support coast to coast. Designed to pair with JD machines but compatible with any skid steer via universal quick attach.
Care & Maintenance
- Inspect broom fill length after every 20 hours of use — bristles below minimum length drag rather than sweep, waste time, and mask the fact that you need a replacement
- Clean debris wrapped in the drum core after every extended session — wire, hair, and root cause drum imbalance and stress the hydraulic motor bearings
- Grease drum bearing end caps monthly during active use periods
- Check hydraulic motor connections and angle cylinder fittings weekly — broom motors work hard and connection fittings loosen over time
- Store on end or off the ground so bristle fill doesn't take a permanent set under drum weight — brooms stored drum-down develop flat spots in the fill that affect sweep quality
How to Connect
- Attach broom frame using Bob-Tach
- Connect hydraulic couplers for rotation motor
- Verify rotation direction (forward-sweep or reverse-sweep per job)
- Adjust broom angle if applicable — most have manual tilt adjust
⚠ Safety NoteBrooms are typically standard-flow (10-18 GPM). Angle brooms can swivel — set angle before engaging rotation.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/brooms/john-deere-worksite-pro-ba60-broom/
