Case Skid Steer Rock Bucket🔵 Mid
✓ No hydraulics required
✓ Fits most skid steers, including small-frame
View on casece.com →
Overview
The wide-inch rock bucket is designed for picking and sorting rock, frozen clods, concrete rubble, and demolition debris on Canadian construction and farm sites. The open bar/skeleton design lets soil and fines fall through while retaining material. Case CE attachments are available through Canadian equipment dealers and distributors. Available through Case Construction Equipment dealers across Canada.
Canada Availability
Available through Case Construction Equipment dealers across Canada.
Key Facts
- Brand: Case Construction Equipment
- Type: rock bucket (tine-bottom)
- Tine spacing: rock retention, soil screening
- Mount: Case quick attach (SSQA compatible)
- Application: rock/boulder handling, field stone cleanup, aggregate
- Typical weight: 450 lbs (varies by manufacturer)
- Hydraulic flow: no auxiliary hydraulics required — standard SSQA mechanical mount
✅ Specs sourced from casece.com · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- You break and move rock, frozen ground, or heavy demolition debris regularly
- You need a bolt-on cutting edge that's replaceable when worn
⛔ Skip if…
- Your work is mostly topsoil, gravel, and light debris — a GP bucket is lighter and faster
- You need a wider bucket — rock buckets max out around 84 inches for most machines
🔍 Also consider…
- GP bucket for general-purpose daily work
- Skeleton (rock sieve) bucket if you need to separate fines from rock
🔧 Machine Compatibility
Designed for Case machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.
About Case CE in Canada
Case Construction Equipment attachments are available through a national Canadian dealer network. Built to OEM standards and compatible with Case skid steers via universal quick attach.
Care & Maintenance
- Grease the bucket pin and hinge points every 20 hours of use — dry pins wear oval and cause slop in the carrier, which transfers shock to the coupler
- Inspect the cutting edge for wear after work in rock, frozen ground, or hard fill — replace or flip bolt-on edges when worn to 50% of original thickness
- Check coupler latch engagement before every use — a partially latched bucket can release under load
- Clean debris from behind the cutting edge to prevent buildup that warps the edge over time; dried material also traps moisture against bare steel
- Inspect sidewall and base plate welds for cracking after heavy rock or demolition work — cracks spread rapidly if caught late
How to Connect
- Position bucket face-down on ground
- Drive forward into Bob-Tach receiver arms
- Pull both lock handles to engage
- Verify orange indicators show LOCKED
- Test lift 6 inches — do not drive until confirmed locked
⚠ Safety NoteBob-Tach / Bob-Lock verification is critical — look for orange indicator pins fully engaged
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/buckets/case-rock-bucket/
