Case Skid Steer Cement Mixer Attachment🔵 Mid
🟢 Standard Flow
✓ Runs on standard auxiliary flow
✓ Fits most skid steers, including small-frame
View on casece.com →
Overview
Case's skid steer cement mixer is engineered for Case SV and SR series machines, featuring a hydraulically driven drum for on-site concrete mixing at job sites beyond the reach of transit mixers. The heavy-gauge drum resists concrete buildup and is shaped for clean pour control. Available through Case dealerships across Canada.
Canada Availability
Available through Case Construction Equipment dealers across Canada.
Key Facts
- Brand: Case Construction Equipment
- Type: hydraulic skid steer cement mixer
- Drive: hydraulic drum motor
- Mount: Case skid steer quick attach
- Application: footings, fence posts, remote concrete pours
- Compatible with Case SV and SR series skid steer loaders
- Weight: 500–1200 lbs
- Hydraulic flow: 10–20 GPM
✅ Specs sourced from casece.com · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- You pour concrete footings, posts, pads, or fill blocks on sites where a mixer truck can't access or isn't cost-effective
- Remote construction, farm buildings, fence posts, or equipment pads where bagged concrete is the realistic supply
- You want to add concrete mixing capability to an existing skid steer without buying a standalone towable mixer
⛔ Skip if…
- You pour large volumes daily — a dedicated towable mixer or ready-mix truck is more efficient
- Your machine is compact — a full drum of concrete is heavy, check your rated operating capacity
🔍 Also consider…
- Heavy-duty cement mixer for large-frame machines and high-volume pours
- Concrete hopper bucket if mixing is done elsewhere and you just need precise pouring
🔧 Machine Compatibility
Designed for Case machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.
About Case CE in Canada
Case Construction Equipment attachments are available through a national Canadian dealer network. Built to OEM standards and compatible with Case skid steers via universal quick attach.
Care & Maintenance
- Pre-wet the drum with water and coarse aggregate before first use and after any idle period — concrete bonds permanently to a dry drum and is nearly impossible to remove once cured
- Flush the drum with water and a handful of gravel immediately after every pour — even 30 minutes of delay can start the curing process on residual concrete
- Grease drum bearing mounts and hydraulic motor drive shaft weekly during active use
- Inspect the drum opening seal for wear and replace before it allows concrete to reach the bearing housing — concrete in the bearing is immediate bearing failure
- Store with the drum oriented to drain — standing water inside the drum rusts the interior and degrades the mixing fins over time
How to Connect
- Attach mixer frame using Bob-Tach
- Connect hydraulic drum rotation circuit
- Test drum direction — drum should mix inward (counterclockwise as viewed from chute side) for mixing, reverse to discharge
- Verify drum is empty before connecting to machine
⚠ Safety NoteCement mixers are standard-flow. Do not overfill — follow max load ratings on drum decal.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/cement-mixers/case-cement-mixer/
