Gehl Skid Steer 4-in-1 Combination Bucket🔵 Mid
🟢 Standard Flow
✓ Runs on standard auxiliary flow
✓ Fits most skid steers, including small-frame
View on gehl.com →
Overview
The wide-inch bucket is purpose-built for skid steers and compact track loaders working in grading, excavation, and material handling. Gehl attachments are available through Canadian equipment dealers and distributors. Features a replaceable cutting edge and universal SSQA mount for broad machine compatibility. Available through Gehl (Manitou Group) dealers across Canada.
Canada Availability
Available through Gehl (Manitou Group) dealers across Canada.
Key Facts
- Brand: Gehl (Manitou Group)
- Type: hydraulic 4-in-1 combination bucket
- Functions: bucket, blade, clam, grapple
- Drive: hydraulic cylinders
- Mount: Gehl quick attach (SSQA compatible)
- Typical weight: 450 lbs (varies by manufacturer)
- Hydraulic flow: no auxiliary hydraulics required — standard SSQA mechanical mount
✅ Specs sourced from gehl.com · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- You want one bucket that can grab, grade, spread, and load without switching attachments
- You do finish grading or move loose material piles on the same site
⛔ Skip if…
- Your priority is capacity and speed — a GP bucket moves more per cycle
- The added weight of the 4-in-1 mechanism pushes you near your machine's ROC limit
🔍 Also consider…
- GP bucket if capacity per cycle is more important than versatility
- Industrial grapple if bulk debris handling is a bigger priority than bucket work
🔧 Machine Compatibility
Designed for Gehl machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.
About Gehl in Canada
Gehl is a US equipment and attachment manufacturer with Canadian dealer coverage. Gehl attachments are designed to pair with their skid steer line but are compatible with other machines. Gehl dealers are present in most Canadian provinces and can support both machine and attachment service.
Care & Maintenance
- Grease the bucket pin and hinge points every 20 hours of use — dry pins wear oval and cause slop in the carrier, which transfers shock to the coupler
- Inspect the cutting edge for wear after work in rock, frozen ground, or hard fill — replace or flip bolt-on edges when worn to 50% of original thickness
- Check coupler latch engagement before every use — a partially latched bucket can release under load
- Clean debris from behind the cutting edge to prevent buildup that warps the edge over time; dried material also traps moisture against bare steel
- Inspect sidewall and base plate welds for cracking after heavy rock or demolition work — cracks spread rapidly if caught late
How to Connect
- Position bucket face-down on ground
- Drive forward into Bob-Tach receiver arms
- Pull both lock handles to engage
- Verify orange indicators show LOCKED
- Test lift 6 inches — do not drive until confirmed locked
⚠ Safety NoteBob-Tach / Bob-Lock verification is critical — look for orange indicator pins fully engaged
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/buckets/gehl-4-in-1-bucket/
