Gehl Skid Steer Angle Broom🔵 Mid
🟢 Standard Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
✓ Fits most skid steers, including small-frame
View on gehl.com →
Overview
The wide-inch angle broom sweeps paved and gravel surfaces — parking lots, yards, construction sites — pushing debris to the side in a single pass. Gehl attachments are available through Canadian equipment dealers and distributors. The poly or wire bristle head adjusts to multiple angles for windrow positioning. Compatible with skid steers and CTLs via SSQA. Available through Gehl (Manitou Group) dealers across Canada.
Canada Availability
Available through Gehl (Manitou Group) dealers across Canada.
Key Facts
- Brand: Gehl (Manitou Group)
- Type: hydraulic angle broom
- Drive: hydraulic brush motor with angle
- Mount: Gehl quick attach (SSQA compatible)
- Application: construction site cleanup, road sweeping
- Weight: 300–900 lbs
- Hydraulic flow: 15–25 GPM
✅ Specs sourced from gehl.com · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- You clean up debris, sand, and small material from hard surfaces like concrete, asphalt, or warehouse floors
- Spring road sand cleanup in Canadian parking lots is a core task for your machine
⛔ Skip if…
- You need to collect the material, not just move it — an angle broom side-casts debris into a windrow
- Fine dust or regulated material (silica) requires containment — an angle broom disperses it
🔍 Also consider…
- Pickup broom if you need to collect material rather than side-cast it
- Street sweeper or vacuum attachment if dust control is a regulatory requirement
🔧 Machine Compatibility
Designed for Gehl machines but mounts to any skid steer or CTL with a universal SSQA quick-attach plate.
About Gehl in Canada
Gehl is a US equipment and attachment manufacturer with Canadian dealer coverage. Gehl attachments are designed to pair with their skid steer line but are compatible with other machines. Gehl dealers are present in most Canadian provinces and can support both machine and attachment service.
Care & Maintenance
- Inspect broom fill length after every 20 hours of use — bristles below minimum length drag rather than sweep, waste time, and mask the fact that you need a replacement
- Clean debris wrapped in the drum core after every extended session — wire, hair, and root cause drum imbalance and stress the hydraulic motor bearings
- Grease drum bearing end caps monthly during active use periods
- Check hydraulic motor connections and angle cylinder fittings weekly — broom motors work hard and connection fittings loosen over time
- Store on end or off the ground so bristle fill doesn't take a permanent set under drum weight — brooms stored drum-down develop flat spots in the fill that affect sweep quality
How to Connect
- Attach broom frame using Bob-Tach
- Connect hydraulic couplers for rotation motor
- Verify rotation direction (forward-sweep or reverse-sweep per job)
- Adjust broom angle if applicable — most have manual tilt adjust
⚠ Safety NoteBrooms are typically standard-flow (10-18 GPM). Angle brooms can swivel — set angle before engaging rotation.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/brooms/gehl-angle-broom/
