Skid Pro 4-in-1 Combo Bucket 72-Inch Skid Steer🔵 Mid
🟢 Standard Flow
✓ Runs on standard auxiliary flow
✓ Fits most skid steers, including small-frame
View on skidpro.com →
Overview
Skid Pro's 4-in-1 combo bucket functions as a standard dig bucket, dozer blade, grapple, and bottom-dump in one attachment. The design features a tight no-rear-gap construction for better grapple performance, serrated side teeth for grip, and a reversible bolt-on dozer cutting edge that can be replaced unlike welded alternatives. Cylinders are protected from debris damage. Fits most skid steers with universal quick attach. Skid Pro ships to Canada.
Canada Availability
Skid Pro ships to Canadian addresses. Compatible with universal skid steer quick attach on Bobcat, John Deere, Kubota, Case, ASV, and other brands.
Key Facts
- Width: 72 inches
- Functions: dig bucket, dozer blade, grapple, bottom dump
- Dozer edge: bolt-on, reversible and replaceable
- Grapple teeth: serrated side teeth
- Cylinder protection: enclosed
- Frame: reinforced ultra-HD design
- Mount: universal SSQA skid steer quick attach
- Typical weight: 430–560 lbs (varies by manufacturer)
- Hydraulic flow: no auxiliary hydraulics required — standard SSQA mechanical mount
✅ Specs sourced from skidpro.com · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- You want one bucket that can grab, grade, spread, and load without switching attachments
- You do finish grading or move loose material piles on the same site
⛔ Skip if…
- Your priority is capacity and speed — a GP bucket moves more per cycle
- The added weight of the 4-in-1 mechanism pushes you near your machine's ROC limit
🔍 Also consider…
- GP bucket if capacity per cycle is more important than versatility
- Industrial grapple if bulk debris handling is a bigger priority than bucket work
🔧 Machine Compatibility
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About Skid Pro in Canada
Skid Pro manufactures attachments in the USA and has a strong Canadian distribution footprint. Their catalog covers most common attachment types with a focus on durability and value for everyday contractor use.
Care & Maintenance
- Grease the bucket pin and hinge points every 20 hours of use — dry pins wear oval and cause slop in the carrier, which transfers shock to the coupler
- Inspect the cutting edge for wear after work in rock, frozen ground, or hard fill — replace or flip bolt-on edges when worn to 50% of original thickness
- Check coupler latch engagement before every use — a partially latched bucket can release under load
- Clean debris from behind the cutting edge to prevent buildup that warps the edge over time; dried material also traps moisture against bare steel
- Inspect sidewall and base plate welds for cracking after heavy rock or demolition work — cracks spread rapidly if caught late
How to Connect
- Position bucket face-down on ground
- Drive forward into Bob-Tach receiver arms
- Pull both lock handles to engage
- Verify orange indicators show LOCKED
- Test lift 6 inches — do not drive until confirmed locked
⚠ Safety NoteBob-Tach / Bob-Lock verification is critical — look for orange indicator pins fully engaged
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/buckets/skid-pro-4n1-bucket-72/
