Berlon Skid Steer Ice Scraper with Oscillating Disc🔵 Mid
🟢 Standard Flow
✓ Runs on standard auxiliary flow
✓ Fits most skid steers, including small-frame
View on langnerequipment.ca →
Overview
Berlon's skid steer ice scraper uses an oscillating disc to break and scrape ice from parking lots and hard surfaces without damaging pavement. Langner Equipment describes it as one of the best ice scrapers available in North America. Stocked in Canada at approximately $1,990 CAD. Used widely by Canadian commercial snow operators who need to manage ice buildup on paved surfaces without chemical-only treatments.
Canada Availability
Available in Canada through Langner Equipment at approximately $1,990 CAD (verify current pricing).
Key Facts
- Type: ice scraper with oscillating disc
- Application: pavement ice removal, parking lots
- Heavy-duty oscillating disc mechanism
- Surface-safe design
- SSQA universal quick attach
- Weight: 400–1200 lbs
- Hydraulic flow: N/A - passive attachment
Is This Right For You?
✅ Buy if…
- You need to push loose material, level rough grade, or backfill trenches on your own property or job sites
- The skid steer you already own can replace a dedicated dozer for light earthwork
⛔ Skip if…
- Finish grading quality matters — a GP bucket backscraping often beats a blade for precision
- Trenching or digging is involved — a blade can't dig, only push
🔍 Also consider…
- Box blade or land plane for finish grading work
- GP bucket for combined digging and moving
🔧 Machine Compatibility
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About Berlon in Canada
Berlon Industries builds attachments in Alberta, making them one of the few truly Prairie-made brands. Berlon products are engineered for Canadian conditions with local dealer support across Western Canada.
Care & Maintenance
- Grease all hydraulic cylinder pin fittings before every use session — dry pins accelerate wear in the cylinder bores and cause premature side-loading
- Inspect the cutting edge for wear or deformation after hard use — replace bolt-on edges when worn to avoid transferring impact to the blade frame
- Check hydraulic coupler connections for leaks weekly — dozer blade circuits cycle frequently and coupler seals wear faster than on less-cycled attachments
- Inspect tilt and angle cylinder rod seals for leaks after use in abrasive or sandy soil — grit scoring a rod seal causes accelerating internal leakage
- Clean the blade face and frame before storage — mud pockets hold moisture against bare steel and cause rust pitting during off-season storage
How to Connect
- Attach blade frame to Bob-Tach
- If 6-way blade: connect tilt and angle hydraulic circuits (both sides)
- Test all blade movements (up/down, tilt left/right, angle) before working
⚠ Safety NoteSome dozer blades have hydraulic float position — engage float for finish grading
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/dozer-blades/berlon-ice-scraper/
