Blue Diamond 84-Inch 6-Way Dozer Blade Skid Steer⭐ Premium
🟢 Standard Flow
✓ Runs on standard auxiliary flow
⚠ Borderline for small-frame machines — verify ROC
✓ Fits most mid-frame skid steers & CTLs
View on bluediamondattachments.com →
Overview
Blue Diamond's 84-inch 6-way dozer blade angles, tilts, and pitches in six directions for maximum grading flexibility on construction, site clearing, and road maintenance work. The reversible 3-piece cutting edge extends service life significantly. At 84 inches wide, it handles large-frame skid steers on wide grading passes. Available through Blue Diamond's Canadian dealer network with coverage in every province.
Canada Availability
Blue Diamond attachments available through Canadian dealers in every province.
Key Facts
- Working width: 84 inches
- Blade movements: 6-way (angle, tilt, pitch)
- Cutting edge: reversible 3-piece
- Drive: electric-over-hydraulic controls
- Application: grading, site clearing, road maintenance
- Mount: universal SSQA skid steer quick attach
- Weight: 475–1400 lbs
- Hydraulic flow: 10–20 GPM
Is This Right For You?
✅ Buy if…
- You need hydraulic angle and tilt for full-control grading, ditch work, or road shaping
- You're a contractor doing regular heavy earthwork where blade control speed pays off
⛔ Skip if…
- Basic site clearing is all you need — the hydraulic tilt circuit adds cost and complexity you won't use
- Your machine doesn't have a third hydraulic circuit — 6-way blades need it
🔍 Also consider…
- 4-way blade if tilt control isn't essential for your work
- Motor grader attachment for high-precision grading work
🔧 Machine Compatibility
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About Blue Diamond in Canada
Blue Diamond Attachments manufactures in the USA and distributes widely into Canada. Known for heavy-duty construction and a broad catalog, Blue Diamond is a go-to brand for contractors who want North American-made quality.
Care & Maintenance
- Grease all hydraulic cylinder pin fittings before every use session — dry pins accelerate wear in the cylinder bores and cause premature side-loading
- Inspect the cutting edge for wear or deformation after hard use — replace bolt-on edges when worn to avoid transferring impact to the blade frame
- Check hydraulic coupler connections for leaks weekly — dozer blade circuits cycle frequently and coupler seals wear faster than on less-cycled attachments
- Inspect tilt and angle cylinder rod seals for leaks after use in abrasive or sandy soil — grit scoring a rod seal causes accelerating internal leakage
- Clean the blade face and frame before storage — mud pockets hold moisture against bare steel and cause rust pitting during off-season storage
How to Connect
- Attach blade frame to Bob-Tach
- If 6-way blade: connect tilt and angle hydraulic circuits (both sides)
- Test all blade movements (up/down, tilt left/right, angle) before working
⚠ Safety NoteSome dozer blades have hydraulic float position — engage float for finish grading
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/dozer-blades/blue-diamond-6way-dozer-blade-84/
