Cat Work Tools Skid Steer Flail Mower🔵 Mid
🟡 High Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
⚠ Borderline for small-frame machines — verify ROC
✓ Fits most mid-frame skid steers & CTLs
View on cat.com →
Overview
Cat Work Tools offers a hydraulic flail mower attachment for Cat skid steers and CTLs. The rotating flail blade system is well suited for roadside vegetation management, ditch mowing, and rough ground clearing on Canadian municipal and provincial highway projects. Available through Cat dealers across Canada as part of the Work Tools attachment range.
Canada Availability
Available through Cat Work Tools dealers across Canada.
Key Facts
- Brand: Cat Work Tools
- Type: hydraulic flail mower
- Drive: hydraulic motor, flail rotor
- Mount: Cat quick attach (BOCE)
- Application: roadside mowing, ditch clearing, vegetation management
- Weight: 700–1800 lbs
- Hydraulic flow: 15–25 GPM
✅ Specs sourced from cat.com · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- You mow ditches, roadsides, pastures, or acreage where contained discharge matters — flails don't throw rocks
- Golf courses, parks, municipal rights-of-way, or any site where flying debris risk is a concern
- You want a mulching cut rather than a raw-discharge mow — flails produce finer material
⛔ Skip if…
- Pure production speed is your goal and debris risk is low — a rotary cutter covers more ground per hour
- Heavy brush over 3 inches is your main vegetation — a brush cutter or mulcher handles that range better
🔍 Also consider…
- Rotary cutter for faster coverage on low-risk open land
- Brush mulcher for heavy overgrowth and woody vegetation
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid-frame machines (S450–S650 class) are the most common fit.
About Cat in Canada
Caterpillar attachments are backed by the largest dealer network in Canada, with service centres in every major city. OEM quality with the assurance of nationwide parts and support.
Care & Maintenance
- Inspect all flail hammers before every use — broken or missing hammers unbalance the rotor; a single missing hammer at high RPM creates destructive vibration
- Replace flail hammers in matched sets to maintain rotor balance — even one missing hammer causes vibration that damages drive motor bearings
- Grease rotor shaft bearing housings after every 8 hours of cutting
- Remove wrapped wire, twine, and root material from around the rotor shaft after every session — wrapped material cuts through shaft seals and causes bearing contamination
- Check the hydraulic motor case drain line for leakage after extended work in thick material — a restricted drain causes shaft seal failure and catastrophic motor damage
How to Connect
- Attach frame using Bob-Tach
- Connect high-flow hydraulic couplers
- Run rotor at idle for 20 seconds before engaging full speed
- Test stall protection if equipped
⚠ Safety NoteKeep bystanders 100m+ clear. Flying debris is serious risk.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/flail-mowers/cat-flail-mower/
