Erskine Attachments Skid Steer Flail Mower🔵 Mid
🟡 High Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
⚠ Borderline for small-frame machines — verify ROC
✓ Fits most mid-frame skid steers & CTLs
View on erskineattachments.com →
Overview
The wide-inch flail mower cuts grass, light brush, and overgrown vegetation to a fine mulch on Canadian roadsides, municipal right-of-ways, and acreages. Erskine Attachments (Minnesota) has Canadian dealer coverage and a reputation for heavy-duty northern-climate designs. Flail knives re-ingest cuttings for finer mulching than rotary cutters, and the enclosed deck reduces throw hazard. Requires adequate hydraulic flow. Available in Canada through Erskine Attachments dealers.
Canada Availability
Available in Canada through Erskine Attachments dealers.
Key Facts
- Brand: Erskine Attachments
- Type: hydraulic flail mower
- Drive: hydraulic flail rotor
- Mount: universal SSQA quick attach
- Weight: 700–1800 lbs
- Hydraulic flow: 15–25 GPM
Is This Right For You?
✅ Buy if…
- You mow ditches, roadsides, pastures, or acreage where contained discharge matters — flails don't throw rocks
- Golf courses, parks, municipal rights-of-way, or any site where flying debris risk is a concern
- You want a mulching cut rather than a raw-discharge mow — flails produce finer material
⛔ Skip if…
- Pure production speed is your goal and debris risk is low — a rotary cutter covers more ground per hour
- Heavy brush over 3 inches is your main vegetation — a brush cutter or mulcher handles that range better
🔍 Also consider…
- Rotary cutter for faster coverage on low-risk open land
- Brush mulcher for heavy overgrowth and woody vegetation
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid-frame machines (S450–S650 class) are the most common fit.
About Erskine Attachments in Canada
Erskine is a US attachment brand with Canadian dealer coverage, known particularly for augers, soil conditioners, and specialty attachments. Erskine products are available at equipment dealers across Canada and are respected for quality build and reliable performance.
Care & Maintenance
- Inspect all flail hammers before every use — broken or missing hammers unbalance the rotor; a single missing hammer at high RPM creates destructive vibration
- Replace flail hammers in matched sets to maintain rotor balance — even one missing hammer causes vibration that damages drive motor bearings
- Grease rotor shaft bearing housings after every 8 hours of cutting
- Remove wrapped wire, twine, and root material from around the rotor shaft after every session — wrapped material cuts through shaft seals and causes bearing contamination
- Check the hydraulic motor case drain line for leakage after extended work in thick material — a restricted drain causes shaft seal failure and catastrophic motor damage
How to Connect
- Attach frame using Bob-Tach
- Connect high-flow hydraulic couplers
- Run rotor at idle for 20 seconds before engaging full speed
- Test stall protection if equipped
⚠ Safety NoteKeep bystanders 100m+ clear. Flying debris is serious risk.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
More from Erskine Attachments
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/flail-mowers/erskine-flail-mower/
